MCLIMITE MC-LW-V02 MCL VICKI Smart Thermostat
Inside the box
Technical specifications
- Description: MClimate Vicki LoRaWAN – Smart Radiator Thermostat
- Developed & Manufactured by MClimate™
- Model: MC-LW-V02
- Dimensions: 54x78x50mm
- Weight: 107gr.
- Wireless technology: LoRaWAN® 1.0.3
- LoRaWAN Security: LoRaWAN® End-to-End encryption (AES-CTR)
- LoRaWAN Device type: Class A End-device
- Supported LoRaWAN Features: OTAA, ADR, Adaptive Channels setup
- Supported LoRaWAN Regions: EU868 – 870
- Link budget: 130dB
- RF Transmit power: 14dB
- Power supply: 3V (2 x AA batteries)
- Sensors: temperature and humidity
- Work temperature: 0°С to +60°С
- Material: ABS + Glass
Safety Instructions
Please read the safety instructions before installing the device! Failure to follow the recommended instructions in this manual may be dangerous or in violation of the law. The manufacturer Melissa Climate Jsc., is not responsible for any loss or damage caused by failure to follow the instructions in the operating manual.
Environmental conditions, in which the device is intended to operate:
- Indoor only;
- Altitude up to 2000m;
- Ambient temperature: 0°С to +60°С;
- Maximum relative humidity of 80% for temperature up to 31°С, decreasing
- linearly to 25% relative humidity at temperature of 50°С;
- Environment with contamination degree 2 (PD2).
Batteries
- Unplug the backplate of Vicki.
- Open the metal battery cover gently by using two fingers.
- Insert 2xAA 1.5VDC batteries and fix the battery cover tightly in place
- After successfully inserting the batteries and closing the metal battery plate, the device will display “Hi”.
Installation
Remove the old thermostatic valve.
- Set the old thermostatic valve to the highest setting (e.g. 5) .
- Unscrew the securing ring and remove the thermostat.
Mount Vicki on the thermostatic valve
- Place the backplate of Vicki on the thermostatic valve.
- Screw tightly the securing ring. Do it by hand, no special instruments required. Do not overscrew.
- Insert Vicki on the backplate
- Apply moderate pressure with your palm on Vicki’s display and rotate the device clockwise to secure it on the backplate.
After succesfully mounting of Vicki the front display must show the callibration animation.
- Open your LoRaWAN Network provider access panel and add the device using the supplied Serial Number, DevEUI, AppEUI (JoinEUI) and AppKey
- Continue the Installation with the instructions of your LoRaWAN Network provider
Device operation
Manual target temperature control
You can set desired temperature directly from Vicki by rotating the device until you see the target temperature on the display
Low battery indication
If Vicki’s batteries are running low, she indicates that by showing a “Lo” message on the display.
Child lock
If Child lock is activated, Vicki’s display will show “Ch” and the manual temperature control will be disabled
Callibration
Once you attach Vicki to the radiator, a calibration process will be initiated. The aim of the calibration process is to let Vicki know the kind of valve she is attached to. During calibration, the display will show a loading animation.
Storage and transportation conditions
- Ambient temperature :-40°С to +85°С;
- Relative humidity 5% to 90% without condensation
Legal Notices
All information, including but not limited to, features, functionality, and / or other product specifications are subject to change without notice. MClimate retains all rights to review or update its products, software or documentation without being required to notify any private or legal person. The MClimate and MClimate logo are trademarks of Melissa Climate Jsc. All other brands and product names mentioned herein are trademarks of their respective owners.
Manufacturer
- Melissa Climate Jsc
- Gen. Gurko 4 street
- 1000 Sofia,Bulgaria
Compliance with the WEEE Directive
The appliance marked with this symbol should not be disposed of with other household waste. It must be handed over to the relevant collection point for the recycling of electrical and electronic equipment
Compatibility
- Vicki works with the majority of radiator valves.
- Default radiator valve fitting: M30x1.5
- Available adaptors: RA, RAV, RAVL, ORAS, Oventrop
In order to operate Vicki, you will need:
- LoRaWAN network
- Batteries
- Battery type: 2xAA (1.5VDC each)
- Device operating voltage: 2.7 – 3.6VDC
REFERENCE
DOWNLOAD MANUALS:
MCLIMITE MC-LW-V02 MCL VICKI Smart Radiator Thermostat Installation guide
OTHER MANUALS
MCLIMITE MC-LW-V02 MCL VICKI Smart Radiator Thermostat Product Specification Sheet
MCLIMITE MC-LW-V02 MCL VICKI Smart Thermostat Radiator Installation guide