Luxpro-LOGO

LUXPRO P111 NON-PROGRAMMABLE THERMOSTAT 

LUXPRO-P111-NON-PROGRAMMABLE-THERMOSTAT-Product-Specifications-PRODUCT

Our job-friendly, non-programmable value thermostat with features you might not expect!

Non-Programmable

Product Highlights

Product Features

Installation

SPECIFICATIONS

LUXPRO-P111-NON-PROGRAMMABLE-THERMOSTAT-Product-Specifications-FIG-1

Dimensions 5.375″ (136mm) wide x 3.375″ (86mm) tall x 1.25″ (32mm) deep
Heat/Cool Terminals RH, RC, W, Y, G, C, O/B (solid pins for 24v and Millivolt systems)
Electrical Ratings 1.5 Amps per terminal at 24 volts
Temperature Control Range ■   Temp control 45°F to 90°F (7°C to 32°C)

■   Display range: 23°F to 99°F (-5°C to 37°C)

■   Temperature Differential: adjustable from ±0.25°F to ±2.25°F

Accuracy ±1°F over a range of 45°F to 90°F.

Environmental Limits ■   Moisture and Dust: meets IP20

■   Operating Humidity: 20% to 90% (non-condensating)

■   Operating temperature: 14°F to 114°F (-10°C to 45°C)

■   Storage temperature: -4°F to 140°F (-20°C to 60°C)

■   Electrical Immunity: meets relevant EMI/EMC specifications

Compatible With ■   For most 24V heating and A/C systems

■   1-heat/1-cool: gas, oil, electric or single stage heat pump systems

■   2-wire heat only hydronic systems (hot water baseboard & radiator)

■   Millivolt systems (wall heaters/furnaces & gas fireplaces)

Not Compatible With ■   Multi-stage heating & AC systems

■   Multi-stage heat pumps

■   3-wire hydronic zone valve systems

■   Line voltage systems (120/240 VAC)

Packaging ■   Master Carton: 10 units

■      UPC: 0 21079 14111 1

4747 South Broad Street I Building 101 – Suite 330 I Philadelphia, PA 19112 I P: 856.234.7905 I F: 856.234.7825 LuxProProducts.com

REFERENCE:

Download Manual:

LUXPRO P111 NON-PROGRAMMABLE THERMOSTAT Product Specifications

Other manuals:

LUXPRO P111 NON-PROGRAMMABLE THERMOSTAT Installation Manual

Luxpro-LOGO

LUXPRO P111 NON-PROGRAMMABLE THERMOSTAT Product Specifications

Leave a Reply

Your email address will not be published. Required fields are marked *

To respond on your own website, enter the URL of your response which should contain a link to this post's permalink URL. Your response will then appear (possibly after moderation) on this page. Want to update or remove your response? Update or delete your post and re-enter your post's URL again. (Find out more about Webmentions.)