LuxPro-logo

LUXPRO KN-ZW-SE1-20 Senior Smart Hub Thermostat

LUXPRO-KN-ZW-SE1-20-Senior-Smart-Hub-Thermostat-Product-Specification-product

Description

KONOse is a smart thermostat made for Seniors. It seamlessly connects to many smart hubs and blends in or stands out with its interchangeable Décor-snap covers™. KONOse is designed for energy savings, ease of use, and increased visibility, and for those with limited fine motor skills.

System

ZWAVE Plus Profile

For additional documentation, manufacturer-specific commands or gateway support, please contact [email protected]

Accessories

SPECIFICATIONS MODEL# KN-ZW-SE1-20
(subject to change)

Dimensions Height: 4.5″ (114.3 mm), Width: 4.5″ (114.3 mm),

Depth: 1.0″ (25.4 mm)

Heat/Cool Terminals Heat: 2 total (W, Y, G, W2/O/B, C, RH, RC, LPB)

Cool: 1 total (Y1)

Electrical Ratings Voltage Range: 20-30V AC

Max Avg. Current Draw: 120mA at 24V AC or 4 x

AA alkaline battery

Output Rating: @24V a.c. Max. 1.5A, 4.2A resistive load combined load

Temperature Control Range Control Range: 50F to 90F (10C to 32C) Display Range: 32F to 99F (0C to 37C)
Environmental Limits Operating Limits: 14F to 122F (-10C to 50C) Storage Limits: -4F to 140F (-20C to 60C) Operating Humidity: 20% to 80% non-condensing Moisture and Dust: Up to IP20
ZWAVE Specifications ZWAVE Plus

Frequency: 908 MHz

Max Transmission Power = +4dBm

Compatible With Universal compatibility with forced air, gas, oil and electric furnaces up to 2h/1c, heat pump systems with or without aux/emergency heat and hydronic (hot water) zone valves (2 wire)
Not Compatible With 120V/240V line voltage systems
Packaging Master Carton: 20 Units
Other Technical Disconnection Means: Type 1B Pollution Degree: 2

Impulse Voltage: 330V

Automatic Action: 100,000 cycles

REFERENCE:

Download Manual:

LUXPRO KN-ZW-SE1-20 Senior Smart Hub Thermostat Product Specification

LuxPro-logo

LUXPRO KN-ZW-SE1-20 Senior Smart Hub Thermostat Product Specification

Leave a Reply

Your email address will not be published. Required fields are marked *

To respond on your own website, enter the URL of your response which should contain a link to this post's permalink URL. Your response will then appear (possibly after moderation) on this page. Want to update or remove your response? Update or delete your post and re-enter your post's URL again. (Find out more about Webmentions.)