Honeywell Home RTHL3550 Programmable Thermostat Quick Installation Guide

Honeywell-Home-logo (2)

Honeywell Home RTHL3550 Programmable Thermostat

Honeywell Home-RTHL3550-Programmable-Thermostat-product

Installation is Easy

  • Label wires and remove your old thermostat
  • Install and wire your new thermostat
  • Set your new thermostat to match your heating/cooling system
    It is preset for the most common system
    We are here to help.
    Call 1-800-468-1502 for wiring assistance before returning the thermostat to the store.Honeywell Home-RTHL3550-Programmable-Thermostat-fig.1
  1. Turn Off Power to the Heating/Cooling SystemHoneywell Home-RTHL3550-Programmable-Thermostat-fig.2
  2. Remove Old Thermostat
    Remove old thermostat but leave the wallplate with wires attached. Honeywell Home-RTHL3550-Programmable-Thermostat-fig.3
    MERCURY NOTICE: Do not place your old thermostat in the trash if it contains mercury in a sealed tube. Contact the Thermostat Recycling Corporation at www.thermostat-recycle.org or 800-238-8192 for information on how and where to properly and safely dispose of your old thermostat.
  3. Label Wires with Tags
    Label the wires using the supplied wire labels as you disconnect them.Honeywell Home-RTHL3550-Programmable-Thermostat-fig.4
    NOTE: Jumper wire used on old thermostat? If yes, note what letters the jumper connected and review in wiring section.
  4. Separate Wallplate from New ThermostatHoneywell Home-RTHL3550-Programmable-Thermostat-fig.5
  5. Mount Wallplate
    Mount the new wallplate using the included screws and anchors.Honeywell Home-RTHL3550-Programmable-Thermostat-fig.6
    Drill 3/32-in. holes for plaster.
    Drill 3/16-in. holes for drywall.
    Use a hammer to tap the anchors into the wall.
  6. Connect WiresHoneywell Home-RTHL3550-Programmable-Thermostat-fig.7
    Simply match wire labels.
    Labels don’t match? See page 24.
    Have a Heat Pump system? See pages 25-26.
    We are here to help.
    Call 1-800-468-1502 for wiring assistance.
  7. Install BatteriesHoneywell Home-RTHL3550-Programmable-Thermostat-fig.8
  8. Install Thermostat onto Wallplate
    Install the thermostat onto the wallplate on the wall.Honeywell Home-RTHL3550-Programmable-Thermostat-fig.9
  9. Turn Power Back On
    Turn the power back on to the heating/cooling system.Honeywell Home-RTHL3550-Programmable-Thermostat-fig.10
  10. If your system type is
    If your system type is:
    • Single Stage Heat and Cool
      Congratulations, you’re done!
      If your system type is:
    • Multistage Heat and Cool
    • Heat Pump* without Backup Heat
    • Heat Pump* with Backup Heat
    • Heat Only
    • Cool Only
      Continue with advanced installation on page 12 to match your thermostat to your system type.
      *Heat Pump—an air conditioner that provides cooling in the summer, and also runs in reverse in the winter to provide heating.
      If you are not sure of your system type or if you have other questions, call us toll-free at 1-800-468-1502.
      This thermostat works on 24-volt or 750 mV systems. It will NOT work on multi-stage heat pump systems or 120/240 Volt systems.

Honeywell International Inc.
1985 Douglas Drive North Golden Valley, MN 55422
Honeywell Limited-Honeywell Limitée
35 Dynamic Drive Toronto, Ontario M1V 4Z9
http://yourhome.honeywell.com

Reference

Download Manual

Honeywell Home RTHL3550 Programmable Thermostat Quick Installation Guide

OTHER MANUALS

Honeywell Home RTHL3550 Programmable Thermostat Owners Manual

Honeywell-Home-logo (2)

Honeywell Home RTHL3550 Programmable Thermostat Quick Installation Guide

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *