Honeywell-Aube-TH140-Programmable-Thermostat-featured

Honeywell Aube TH140 Programmable Thermostat Specification Guide

HoneyWell

Honeywell Aube TH140 Programmable Thermostat 

Honeywell-Aube-TH140-Programmable-Thermostat

MODEL & RATINGS

TH140-28-01

  • 5 A (resistive) @ 24 V, 120 V, 240 V
  • 2 A (inductive) @ 24 V, 120 V, 240 V R, W World except France

SPECIFICATIONS

  • TEMPERATURE CONTROL
  • PROPORTIONAL ADAPTIVE
  • Cycles: selectable 5, 10, 15 or 20 minutes
  • CONVENTIONAL WITH ANTICIPATION
  • Programmable temp. span: ± 0.3ºC (0.5ºF) to ± 0.6ºC (1.1ºF)

PROGRAMMING
7-day, up to 4 time periods, 2 temps. / day
Selectable 12- or 24-hour format, ºC or ºF

POWER SUPPLY
2 AA batteries (not included)

DIMENSIONS (H•W•D)
126 x 97 x 26 mm / 4.9 x 3.8 x 1 inches

FEATURES

Advanced temperature control ensures total comfort by minimising temperature swings
Selectable cycles mean thermostat can be optimised to heating system
Pump protection – for hot water heating activates pump for one minute every 24 hours to prevent seizure
Armchair programming – convenient programming by removing faceplate from base

Instructions inside front panel enable quick, easy programming

Precise LCD – shows room temperature in increments of 0.1ºC or 0.1ºF
Low battery indicator – gives 60 days warning to replace batteries
Remote input enables change of temperature modes from phone (Aube telephone controller required) or alarm/automation system (12 VDC transformer required)

ACCESSORIES

Aube CT240 telephone controller
Aube RC840 electromechanical relay
Aube RC840T electromechanical relay

  • TH140-28.pdf (format PDF)
  • To view a PDF, you must have Acrobat Reader. Click on the icon to download it for free.

Warranty 3 Year Watranrt

CERTIFICATION

References

Download Manual

Honeywell Aube TH140 Programmable Thermostat Specification Guide

Honeywell-Aube-TH140-Programmable-Thermostat-1

HoneyWell

Honeywell Aube TH140 Programmable Thermostat Specification Guide

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *