Hive SLT5 Active Heating 2 wired Thermostat User Manual

Hive SLT5 Active Heating 2 wired Thermostat 

To avoid environmental and health problems due to hazardous substances in electrical and electronic goods, appliances marked with a crossed-out wheeled bin should not be placed into your household rubbish bin. Instead, when they are unable to be reused, they should be recycled. Your local authority will be able to advise you on the location of the nearest recycling
center that is authorized to accept this type of waste. Please recycle responsibly

Welcome to Hive Active Heating

Hive Active Heating is a clever way to control your heating. This guide tells you everything you need to know about your thermostat. To control your thermostat remotely, you need to link it to your Hive hub and Hive account. Just download the Hive app or visit hivehome.com/register to get set up.

Download the Hive app

Hive Active Heating Safety Instructions

1. Make sure your Hive Active Heating is installed by a qualified professional in accordance with the Installation Guide supplied (and available at hivehome.com/support).
2. When using your Hive Active Heating, always follow this User Guide (also available at hivehome.com/support).
3. Place your thermostat away from direct heat sources like radiators, fireplaces, or windows, and out of full sunlight. For optimal performance, we recommend keeping the operating
   temperature between 5°C and 32°C.
4. Keep your thermostat away from water and other liquids, as well as humid places like the bathroom or shower. Also remember it’s for indoor use only.
5. If you want to clean your thermostat, a soft dry cloth will do the trick. Don’t use solvents or abrasive cleaners.
6. You can remove your thermostat from its wall plate to change the batteries. (Remember to keep the batteries away from children as they can be a health hazard.)
7. Don’t try to open your thermostat. There are no parts inside that you can service or replace.
8. If the wire between your thermostat and the boiler is damaged or frayed, switch off the power to your boiler (normally a switch at the wall or fuse box) and contact a qualified
   boiler service engineer.
9. If your Hive Active Heating isn’t working as expected, please see hivehome.com/support for help

Getting started

How to change the temperature:

1. Turn the dial clockwise to increase the target temperature
2. Your heating will come on if the target temperature is above the actual temperature (you’ll see when the heating is on)
3. Turn the dial anti-clockwise to lower the target temperature
4. When flashes, boiler protection mode has temporarily engaged to stop your boiler is switched on and off too many times within 1 minute

Heating
How to change mode:
Your thermostat has 3 different heating modes: Schedule, Manual, and Off

1. Push the dial to wake up the thermostat
2. Once the screen turns on press the Menu button and select Heat
3. Here you’ll see the different modes: Schedule, Manual, and Off
4. Select one by turning and pushing the dial Schedule turns your heating on and off when you want it to and can manually makes sure your home maintains a constant temperature
   Off leaves your heating in Frost Protection – so your heating will only come on if your home drops below 7°C. You’ll see on the screen to remind you that Frost Protection is enabled

Setting up a heating schedule:
Your thermostat will walk you through setting up your heating schedule step by step.
To do this:

1. Wake up your thermostat by pushing the dial and then pressing the Menu button
2. Turn the dial to select Heat and push the dial to confirm
3. Select Schedule and push the dial to confirm
4. Scroll to Start Over and push the dial to confirm
5. Follow the on-screen instructions to create your new schedule

How to view your heating schedule:

1. Push the dial to wake up the thermostat
2. Once the screen turns on press the Menu button
3.  Turn the dial to select Heat, then push the dial
4.  Choose Schedule then select View/Edit Current
5.  Turn the dial left or right to browse through the days and select a day
6.  You’ll now see the schedule for the day you selected

How to boost your heating for a short time:

1. Press the Heating Boost button on top of the thermostat to turn the heating on
2. Press the Heating Boost button again to increase the length of your boost
3. Turn the dial to change the boost temperature it’s set to 22°C by default)
4. When the boost finishes, your heating will go back to its previous mode
5. To cancel boost early, press the Back button

How to advance your schedule:
When in schedule mode, you can advance to the next event early – for example, if you are going out or going to bed early.

1. Simply press the Heating Advance button on top of the thermostat to move to the next event in your schedule.
2.  Your target temperature will change immediately and your thermostat will continue to run your schedule.
3. Turn the dial if you want to change the target temperature further

Child Lock
Set a Child Lock so little hands can’t change the temperature, find it under Menu then Settings

Hive Multizone
Multizone lets you control up to three existing plumbed heating zones in your home. Each zone needs its own Hive thermostat. If you are a Hive Multizone customer, to change the zone name of each thermostat log in to the Hive app or online dashboard and select Manage Devices.

For more information on Hive Multizone, please visit hivehome.com/support

Troubleshooting

How to change the batteries:
A red battery symbol means your batteries need to be replaced with three new AA batteries.

1. Pull your thermostat away from the wall to detach it from its backplate, then turn it over to access the batteries
2. Simply pop the old batteries out and put the new ones in
3. Push your thermostat back onto its backplate until it clicks securely into place.

Thermostat unplugged

If a “thermostat unplugged” message shows – it means that your thermostat has been unplugged from its backplate. When your thermostat is unplugged it cannot control your boiler. Your
heating will immediately switch off and will stay off until your thermostat is plugged back in. Keep your thermostat plugged in to control your heating with Hive. For more information visit hivehome.com/support or get in touch with the Hive team at [email protected]

Icons you might see on your thermostat

A thermostat for every home
Accessorize your thermostat with our range of frames using colors from the Dulux Feature Wall collection. You can choose from 11 Dulux colors plus a special wood effect frame.
Visit hivehome.com to order your frame

Can we help?
You can view our handy how-to-use videos along with hints and tips at hivehome.com/support If for any reason you need to return your Hive Active Heating, simply return your box and its contents to the retailer. Any return is subject to the retailer’s refund policy so please don’t forget to check the retailer’s refund policy too.

REFERENCE

Download Manual

Hive SLT5 Active Heating 2 wired Thermostat User Manual

Hive SLT5 Active Heating 2 wired Thermostat User Manual