Heatrite HY08WE-2 Programmable Thermostat
Instruction
Preparation required for Wifi Connection:
You will need a 4G mobile phone and wireless router. Connect the wireless router to the mobile phone and record the WIFI password (you will need it when the thermostat is paired with the Wifi).
Step 1 Download your app
Android users can search “Smart life” or ” Smart RM” on Google Play, IPhone users can search “Smart life” or ” Smart RM” in the App Store.
Step 2 Register your account
- After installing the app, click “register” (Fig 2-1)
- Please read the Privacy Policy and press Agree to proceed to the next step. (Fig 2-2)
- Registration account name uses your Email Or mobile phone number. Select Region, then click “Continue” (Fig 2-3)
- You will receive a 6-digit verification code via email or SMS to enter your phone (Fig 2-4)
- Please set the password, Password must contain 6-20 letters and numbers. click “Done” (Fig 2-5)
Step 3 Create family information(Fig 3-1)
- Fill in the family name (Fig 3-2 ).
- Select or add a room (Fig 3-2).
- Set location permission (Fig 3-3) then set thermostat location (Fig 3-4)
Step 4 Connect your Wi-Fi signal (EZ distribution model
- Go to your Wifi setting on your phone and make sure you are connected via 2.4g and not 5g Most modern routers have 2.4g & 5g connections. 5g connections do not work with the thermostat.
- On the phone press “Add Device” or “+” in the upper right corner of the app to add the device (Fig 4-1) and under the small appliance section select the device type “Thermostat” ( Fig 4-2)
- With the thermostat powered on, press and hold
at the same until both icons 
flash to indicate the EZ distribution mode. This can take between 5-20 seconds. - On your thermostat confirm icons are rapidly blinking and then go back and confirm this on your app. Enter the password of your wireless router this is case sensitive (fig 4-4) and confirm. The app will connect automatically (Fig 4-5) This may typically take up to 5 90 seconds to complete.
- If you get an error message make sure you have entered your correct Wi-Fi password (case sensitive typically found on the bottom of your router) and that you are
- not on your Wi-Fi’s 5G connection.
Your room name can be edited when the device is connected
Step 4b (Alternative method) (AP mode pairing) Only do this if step 4a failed to pair the device
- On the phone press “Add Device or “+” in the upper right corner of the app to add the device (Fig 4-1) and under the small appliance section select the device type “Thermostat” and click AP Mode in the top right corner. (Fig 5-1)
- On the thermostat press power on and then press and hold at
until
3 flashes. - This can take between 5-20 seconds. If also
flashes release buttons and press and hold her again until just & flashes. - On the app click “confirm light is blinking”, then enter the password of your wireless router (fig 4-4)
- Press “Connect now” and select the Wifi signal (Smartlife-XXXX) of your thermostat (Fig 5-3 and 5-4) it will say internet may not be available and ask you to change network but ignore this.
- Go back to your app and click “Connect” then the app will connect automatically (Fig 4-5)
- This may typically take up to 5~90 seconds to complete and will then show confirmation (Fig 4-6) and allow you to change the thermostat name (Fig 4-7)
Step 5 Changing sensor type and temperature limit
- Press the setting key
(Fig 4-8) in the bottom right hand corner to bring up the menu. - Click the Sensor type option and enter password (normally 123456). Then you will be given 3 options:
- “Single built in sensor” will only use the internal air sensor (DO NOT USE THIS SETTING*)
- “Single external sensor” will only use the flor probe (ideal for bathrooms where thermostat installed outside room).
- “Internal and external sensors” will use both sensors to read the temperature (Most common option).
- Once you have chosen the sensor type, check that “Set temp. max” option is set to a suitable temperature for your flooring (typically 45 C)
- A floor probe must always be used with electric underfloor heating to protect the flooring.
Step 6 Programming daily schedule
- Press the setting key (fig 4-8) in the bottom right-hand corner to bring up the menu, at the bottom of the menu there will be 2 stand alone options called “week program type” and “weekly program setting”
- “Week program” type allows you to choose the number of days the schedule applies to between 5+2 (weekday+weekend) 6+1 (Mon-Sat+Sun) or 7 days (all week).
- “Weekly program” setting allows you to choose the time and temperature of your daily schedule at varying points. You will have 6 options of times and temperatures to set. See example below
Additional Features
Holiday Mode:
You can program the thermostat to be on for a set temperature for up to 30 davs so that there is background heat in the house while you are away. This can be found under the mode (fig 4-8) section. You have the option to set the number of days between 1-30 and a temperature up to 27°C.
Lock Mode:
This option allows you to remotely lock the thermostat so no changes can be made. This can be done by clicking the 
(Fig 4-8) symbol. To unlock click the (Fig 4-8) symbol again.
Grouping devices:
You can link multiple thermostats together as a group and control them all simultaneously. This can be done by clicking on the
(Fig 4-8) in the top right corner and then clicking the Create Group option. If you have multiple thermostats linked it will allow you to tick each one that you want to be in the group and once you confirm the selection you will be able to name the group.
Family Management
You can add other people to your family and allow them to control the devices you have linked. To do this you need to go back to the home page and click on the family name in the top left corner and then click on Family Management. Once you have selected the family you wish to manage there will be an option to Add Member, you will need to enter the mobile number or email address they have registered the app with to send them an invitation. You can set whether or not they are an administrator which allows them to make changes to the device ie removing it.
Technical Manual
- Product Specifications
- Power: 90-240Vac 50/50HZ
- Display accuracy:: 0.5°C
- Contact capacity: 16A(WE) /A(WW)
- Range of temperature display:: 0~40°C
- Probe sensor:: NTC(10k)1%
Before wiring and installing
- Read these instructions carefully. Failure to follow them could damage the product or cause a hazardous condition.
- Check the ratings given in the instructions and on the product to make sure it is suitable for your application.
- Installer must be a trained and qualified Electrician
- After installation is complete check operation as per these instructions
- Disconnect power supply before installation to avoid electrical shock or equipment damage.
Start up
Where possible you should set up the Wifi by using the attached manual. If unable to do so please see guide below. When you turn on the thermostat for the first time you will need to set the time and also the number that corresponds to the day of the week (1-7 starting from Monday). This can be done by following the steps below:
- Press the
button and the time in the top left corner will start flashing. - Press
to get to the desired minute and then press - Press to get to the desired hour and then press
- Press to change the day number. 1=Monday 2= Tuesday 3=Wednesday 4=Thursday
- 5=Friday 6=Saturday 7=Sunday – Once you have selected the day press to confirm
You will now be ready to set the temperature. This can be done by pressing The set temperature is displayed in the top right comer. It is recommended to start out at a low temperature and increase the temperature 1 or 2 degrees a day until you reach a comfortable heat. This only needs to be done once. Please see the operation key list which shows all the additional functions per button. These can all be controlled via the mobile app if you have paired your device (see attached pairing instructions)
Displays
Description Of Icon
Wiring Diagram
Electric heating wiring diagram (16A)
Connect the heating mat to 1 & 2, connect the power supply to 3 & 4 and connect the floor probe to 5 & 6. If you connect it wrongly, there will be a short circuit and the thermostat may become damaged and the warranty will be invalid.
Water heating wiring diagram (3A)
Connect the valve to 183(2 wire close valve) or 283 (2 wire open valve) or 1&2&3(3 wire valve), connect the power supply to 384.
Water heating and gas wall-hung boiler heating
Connect the valve to 183(2 wire close valve) or 2&3 (2 wire open valve) or 1&283(3 wire valve), connect the power supply to 384, and connect
Operation Key
Programmable
5+2 (factory default), 6+1 and 7 day models contain 6 time periods to automate. In the advanced options choose number of days required, when power is on then long press 
for 3-5 seconds to enter into programming mode. Short press to choose: hour, minute, time period, and press ) to adjust data. Please note after about 10 seconds it will automatically save and exit.
See the example below.
Advanced options
When the thermostat is off long press for 3-5 seconds to access the advanced setting. From A1 to AD, short press to choose the option, and adjust data by short press to switch next option.
Sensor fault display
Please choose correct setting of built-in and external sensor (option A4), if chosen wrongly or if there is a sensor fault (breakdown) then error “E1” or “E2* will be displayed on the screen. Thermostat will stop heating until the fault is eliminated.
Installation Drawing
REFERENCE
DOWNLOAD MANUALS:
Heatrite HY08WE-2 Programmable Thermostat User Guide
