Devireg 8096265 Programmable Thermostat
Setting up your Devireg 535 programmable thermostat with your devimat system
Selection of sensor type
Power on the thermostat With the front off, with a small screwdriver or pencil press the installation button.
Select the floor 
sensor
To change the default setting, press and 
use the arrow buttons 
to select your choices. Press to accept your choice.
Press 
for the next setting.
Maximum floor temperature.
- Tiles on timber based floor = 29°C
- Tiles on concrete based floor = 40°C
- Timber covered floors = 27°C (parquet etc. – Please check with floor supplier)
To change this setting, press and use the arrow buttons to select your choice. Press to accept your choice.
Press for the next setting.
Scale
- When selecting Celsius, the display will show the actual temperature at the floor sensor.
- To change this setting, press and use the arrow buttons to select your choice.
- Press to accept your choice.
Press the installation pinhole to exit installation mode.
Put the frame and front back on.
Setting the time
By pressing the, the hours starts flashing – you can now change them with the.Press the again to change the minutes with the .
To finish, press l then
Setting the weekday
Setting the timer periods
The first period bar flashes indicating this is the morning period. By pressing the , the start time of the period starts flashing. You can change it with the arrow buttons in increments of 15 minutes.
- Press the to accept.
The second (day), third (evening) and fourth (night) period bars are set as mentioned above.
Setting the comfort temperature
- By pressing the , the preset comfort temperature starts flashing.
- You can change it with the arrow buttons
- Press to accept, then press
Setting the set back temperature (second and fourth period)
- By pressing the , the preset comfort temperature starts flashing, normally this is set to OFF.
- You can change it with the arrow buttons
- Press to accept.
Changing timer program
To change the program:
Keep the button pressed for 2 seconds. The actual program starts to flash. It is now possible to change the program by using the buttonsPress the to accept.
- P1 – Manual mode
- On constantly 24 hours 7 days a week at set temperature.
- P2
- Set temperature – twice a day.
- P3
- Set temperature all day.
- P4
- Set temperature Monday – Friday twice a day.
- Saturday – Sunday all day.
Part no.: 001v01 28.06.10
Reference
Download Manual:
Devireg 8096265 Programmable Thermostat Installation Guide