CENTER 340023 Programmable Thermostat
INTRODUCTION
IMPORTANT: Please read these instructions fully prior to use as they contain information that will help get the best from your wired thermostat, ensuring it is operating correctly and safely.
- If during the installation or set up you experience any issues please call 0344 292 7060 for assistance.
- Must be installed by a competent person.
- To ensure your safety make sure the mains power is switched OFF before accessing wiring.
To prevent a short circuit from a loose wire:
- Multi-core cables: Only remove enough outer insulation to allow secure fixing of the cores into the terminal block.
- Single core cables: Secure them together with a cable tie as close as possible to the terminal block.
Contents
Install the Thermostat
Wiring
Parameters
Manufactured for and on behalf of Wolseley UK Limited, 2 Kingmaker Court, Warwick Technology Park, Gallows Hill, Warwick, Warwickshire, United Kingdom, CV34 6DY
For further information telephone 0344 292 7062
Whilst every care has been taken to ensure that the information included in this document was accurate at the time of printing, we reserve the right to change specifications at any time. The photographs reproduced in this publication are within the constraints of the printing process and are NOT to be used for matching purposes. E&OE.WEEE Directive 2012/19/EU At the end of the product life dispose of the packaging and product in a corresponding recycling center. Do not dispose of the unit with the usual domestic refuse. Do not burn the product.
www.wolseley.co.uk
IG-340018.v01
CE Importer
Wolseley UK Limited, Unit1, M2 Business Park, 132 Duncrue Street, Belfast, BT3 9AR
REFERENCE
DOWNLOAD MANUALS
CENTER EHE0200123 Wired 7-Day Programmable Thermostat Installation Guide
