Bryant T1-NAC Non-Programmable Thermostat
- To Select the Mode:
Use the H/C button to move between the choices. OFF, HEAT, COOL, or EMHT will appear on the display. EMHT will only appear on heat pump models. - To Select the Fan Operation:
Use the FAN button to move between continuous fan (indicated by the FAN ON icon) and auto fan operation. - To Read the Room Temperature:
The large display reads room temperature until a button is pressed. - To Adjust the Setpoint:
In normal operation, the large display shows room temperature. At the first press of the UP or DOWN button, the large display shows the current setpoint and the SET TEMP icon is turned on. Further presses of the UP or DOWN button adjusts the setpoint upward or downward. Five seconds after the last button press, the display returns to room temperature and the SET TEMP icon turns off.
TROUBLESHOOTING
What if there is a green light in the upper corner of the display area?
This thermostat uses a green LED to indicate auxiliary heat and emergency heat operation on the Heat Pump model. This green light means one of two things.
- Auxiliary Heat is on:
This light turns on automatically when the system determines that it’s too cold outside for your heat pump to heat the house without help. So, it’s getting help from the electric heaters.
NOTE: This indicator does not reflect a problem with your system. - Emergency Heat is on:
If the heat pump is not working properly, you can manually select the emergency heat for extra help in heating. You’ll know there’s a problem if the house can’t seem to get warm when it’s cold outside. You want to avoid using emergency heat, though, because it’s the most expensive option. And, of course, if you suspect a problem with your heat pump, call your heating and cooling dealer immediately.
BRYANT HEATING & COOLING SYSTEMS
FOR SERVICE OR REPAIR, FOLLOW THESE STEPS IN ORDER:
FIRST: Contact the installer. You may find their name on the furnace or in your Homeowner’s Packet. If the installer’s name is not known, call your builder or home retailer if yours is a new residence.
SECOND: Contact the nearest distributor. (See telephone yellow pages.)
THIRD: Contact: Bryant Heating and Cooling Systems
Consumer Relations
P.O. Box 4808
Syracuse, New York 13221
Phone: 1–800–428–4326
Model No. ____________________________________________ Unit Serial No. _________________________________________
Date of Installation ______________________________________ Installed by ___________________________________________
Name of Owner ________________________________________ Address of Installation ___________________________________
THERMOSTAT LIMITED WARRANTY
FIVE–YEAR LIMITED WARRANTY — Bryant Heating and Cooling Systems (hereinafter referred to as “Company”) warrants this product to be free from defects in material and workmanship. If a defect is found within five years from the date of original installation of the product (whether or not actual use begins on that date) Company will provide a new or remanufactured part, at Company’s sole option, to replace any defective part, without charge for the part itself. This warranty does not include labor or other costs incurred for diagnosing, repairing, removing, installing, shipping, servicing or handling of either defective parts or replacement parts.
WARRANTY CONDITIONS
- Warranties apply only to products in their original installation location.
- Installation, use, care, and maintenance must be normal and in accordance with instructions contained in the Owner’s Manual and Company’s service information.
- Defective parts must be returned to the distributor through a registered servicing dealer for credit.
- All work shall be performed during normal working hours.
LIMITATIONS OF WARRANTIES — ALL IMPLIED WARRANTIES (INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY LIMITED IN DURATION TO THE PERIOD FOR WHICH THE LIMITED WARRANTY IS GIVEN AND APPLIES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE MAY NOT APPLY TO YOU. THE EXPRESSED WARRANTIES MADE IN THIS WARRANTY ARE EXCLUSIVE AND MAY NOT BE ALTERED, ENLARGED, OR CHANGED BY ANY DISTRIBUTOR, DEALER, OR OTHER PERSON, WHATSOEVER.
THE COMPANY WILL NOT BE RESPONSIBLE FOR
- Normal maintenance as outlined in the installation and servicing instructions or Owner’s Manual, including filter cleaning and/or replacement and lubrication.
- Damage or repairs are required as a consequence of faulty installation, misapplication, abuse, improper servicing, unauthorized alteration or improper operation.
- Failure to start due to voltage conditions, blown fuses, open circuit breakers, or damages due to the inadequacy or interruption of electrical service.
- Damage as a result of floods, winds, fires, lightning, accidents, corrosive environments or other conditions beyond the control of Company.
- Parts not supplied or designated by Company, or damages resulting from their use.
- Company products installed outside the continental U.S.A., Alaska, Hawaii, and Canada.
- Electricity or fuel costs, or increases in electricity or fuel costs from any reason whatsoever, including additional or unusual use of supplemental electric heat.
- ANY SPECIAL INDIRECT OR CONSEQUENTIAL PROPERTY OR COMMERCIAL DAMAGE OF ANY NATURE WHATSOEVER. Some states do not allow the exclusion of incidental or consequential damages, so the above limitation may not apply to you.This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state.The manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
REFERENCE:
Download Manual:
Bryant T1-NAC Non-Programmable Thermostat Homeowner’s Guide
OTHER MANUALS:
Bryant T1-NAC Non-Programmable Thermostat Installation Instruction
Leave a Reply