Bosch-logo

BOSCH THB Smart Room Thermostat

BOSCH-THB-Smart-Room-Thermostat-product

Open-Source-Software

This Bosch Smart Home product uses open-source software. The license information for the components is as follows. core_cm3.h Copyright (C) 2009-2013 ARM Limited. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS „AS IS“ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTH-ERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Safety Instructions

Declaration of Conformity

Robert Bosch Smart Home GmbH declares that this Bosch Smart Home wireless radio equipment Room Thermostat (THB) is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.bosch-smarthome.com/conformity

Environmental Protection and Disposal

Electrical and electronic equipment that is no longer usable and defective or used batteries must be separated from other waste and recycled in an environmentally friendly manner (European Directive on waste electrical and electronic equipment). To dispose of electrical and electronic equipment or batteries, use your country-specific return and collection systems.

Technical Data

Model THB
Article number 8-750-001-259
Batteries 2x 1,5 V LR03/Micro/AAA
Radiofrequency 868,3 MHz / 869,525 MHz
Max. transmission power 10 mW
Radio range in free-field conditions Up to 100 m
Protection class IP20
Ambient  temperature +5 °C to +35 °C

LET’S GET STARTED

  1. Install Smart Home Controller
    If not yet installed: Download the Bosch Smart Home app and install the Bosch Smart Home Controller.
    Install Smart Home Controller
  2. Start Smart Home App
    Now start the Bosch Smart Home app and select “Add device”. Follow the instructions in the app.
    Start Smart Home App
  3. Scan the QR-Code
    The app will prompt you to scan the QR code on the product. The QR code is on the backside of the thermostat.
    Scan the QR-Code
  4. Activate Device
    Insert the batteries to activate the device.
    Activate Device
  5. Mounting*
    Adhere or screw the mounting plate to the required position on the wall.
    * If possible, do not mount the device on an external wall, near a window, near a heat source or in a place exposed to direct or indirect sunlight.
    Mounting
  6. Insert thermostat
    Insert the room thermostat in the frame. Press the room thermostat against the mounting plate until it clicks audibly into place.
    Insert thermostat

Service Instructions

Robert Bosch Smart Home GmbH
Schockenriedstraße 17 70565 Stuttgart-Vaihingen

0808 1011 151* (United Kingdom)
1800 200 724* (Ireland)
Mon-Fri 7:00 am – 8:00 pm
Sat/Sun 8:00 am – 6:00 pm
*Freephone service
[email protected]

Reference

Download Manual

BOSCH THB Smart Room Thermostat User Guide

Bosch-logo

BOSCH THB Smart Room Thermostat User Guide

Leave a Reply

Your email address will not be published. Required fields are marked *

To respond on your own website, enter the URL of your response which should contain a link to this post's permalink URL. Your response will then appear (possibly after moderation) on this page. Want to update or remove your response? Update or delete your post and re-enter your post's URL again. (Find out more about Webmentions.)