BEOK TDS21 Glass Screen Thermostat
Product Summary
TDS21 series thermostats are luxurious programmable thermostats with large-screen displays. It is applied to temperature control of the industrial, commercial, and domestic rooms, and the start of control heating appliances, especially used in floor-heating systems.
Technical Parameter
Power Supply | 200 — 240V 50 —60Hz |
Current Load | ‘.3A (water heating) –.-516A(electric heating) |
Power Consumption | <0.3W |
External Material | PC+ABS (flame retardant) |
Sensing Element | NTC |
Set Temp. Range | 5-99°C |
Floor Set Temp. Range | 5-99°C |
Accuracy | *1 t |
Dimension | 86x86x13.3mm |
Ambient Temp. | 0-45°C,5-95%RH(Non-condensing) |
Storage Temp. | -5-55t |
Timing Error | <1% |
Main Functions and Characteristics
- Large screen display and touch button.
- Power-off memory function.
- 5+2 or 6+1 or 7days six periods program schedule.
- Selectable 80mmx8Omm European hidden box.
- Precise comfort control keeps the temperature within 1 °C of the level you set.
User Interface Explanation
Model Definition
- WP: For Water Heating System, 3A
- EP: For Electric Floor Heating System, 16A
- For example: TDS21-EP TDS21-WP
Model Spec
Model | Current Loading | External Sensor | Week Programmable | Child Lock | Drop up |
IDS21-EP | 16A | ✓ | ✓ | ✓ | Optional |
1DS21-WP | 3A | ✓ | ✓ | Optional |
Wiring Diagram
Operation Instruction
- Setting Power on/off
Pressto turn on/off the power.
- Setting Temperature
Pressto set the temperature.
- Setting the Clock
Pressto set minute, hour and week. Press
for adjusting.
- Setting the Manual Mode.
Manual mode means non-programmable mode.
Pressthen
. will display in the screen, it is in manual mode.
Pressto set the temperature.
Pressto set minute, hour and week.
- Setting the Child Lock
Long pressto enter into child lock mode.
will display.
Long pressagain, the child lock will be disappeared.
- Setting the Programmable Mode.
Pressand hold into programmable mode. LOOP and 12345 will display.
Pressto select the control way: 5+2 or 6+1 or 7 days programmable.
12345 display in the position of week means 5+2;
123456 display in the position of week means 6+1;
1234567 display in the position of week means 7 days programmable.
Pressto select the periods.
Pressto change the temperature;
Pressto do time adjustment.
Pressto change the time;
Pressagain to select the weekend’s temp.
If you want to make temporary adjustment in any period, pressthen
will flash. When finish the setting, all will confirm automatically.
Press to switch operation between manual mode and programmable mode.
Remark
- The defaulted temperature of period3 and period4 is the same as period2. Please change it according to the request.
- When setting temperature is 00, this period is power off.
- How to check floor temp?
During power on, press and hold thenpress the button of power to check floor temp.. OUT TEMP will display.
Pressagain to display room temp.
Advanced Setting
In the state of power-off, long press and hold then press
into advanced setting mode. Then press to set relative item.
Display Code | Function | Setting And Options | Factory Default |
SEN | Sensor mode | 0:Internal sensor1:Floor sensor
2:Both internal sensor and floor sensor |
0 |
OSV | Set temp. rangefor floor sensor | 5-99℃ | 42℃ |
DIF | Precisionfor floor temp. | 1-9℃ | 2℃ |
SVH | High limit temp. for internal sensor | 5-99℃ | 35℃ |
SVL | Low limit temp. for internal sensor | 5-99℃ | 5℃ |
ADJ | Measure temp. | Check and calibrate the actual room temp. | 0.5℃accuracy calibrate |
FRE | Anti-frozen | 00:Close anti-frozen01:Open anti-frozen | 00 |
PON | Power memory | 00:Power memory off 01:Power memory on | 00 |
DFI | Precision for room temp. | 0.5-3℃ | 1℃ |
FAC | Factory setting | 00:Return to factory setting08:Just display | 08 |
Remark:
Deadzone for floor temp.: i.e. the setting deadzone for floor sensor is 2, OSV is 42℃, when actual temp. reach 44℃, the relay will stop working; when actual temp. is back to 40℃, the relay starts working again. It works when room temp. is lower than set temp.
Sensor error:
Please select the right sensor mode. If select the different mode or there is error of sensor, Err will display on the LCD screen, the thermostat will stop heating till the problem is solved.
Installation Instruction
This product is suitable for standard 80*80mm wall box and 60 mm European round box.
- Connect the line of power and valve into the terminals. Fix the wall plate into the wall box by a screwdrive.
- Connect the lines with the LCD board.
- Connect the LCD board into the wall plate.
NOTICE: The installation wire should be 1.5-2.5mm2.
ATT
Thank you for buying this product!
Please read this manual for complete instructions on installing and operating your thermostat. If you require further assistance, please feel free to contact us.
In the box you will find:
Model | TDS21-EP | TDS21-WP |
Thermostat | √ | √ |
User Manual | √ | √ |
Screws | √ | √ |
Dryer | √ | √ |
External sensor | √ |
Our Service:
We offer a warranty of 24 months from the sales day. During the warranty, if it belongs to a quality issue, we will fix or replace them for you for free after test them. If it is not quality problem or beyond the warranty time, we will charge for the after-sales service.
Warning:
The symbol means the unit is being installed, it may cause electrical shock hazards during maintenance, so please make sure it is operated by a professional technical worker.
REFERENCE
Download Manual
BEOK TDS21 Glass Screen Thermostat User Guide
Leave a Reply