LUXPRO-PSP700-SERIES-ELECTRONIC-THERMOSTAT-Installation-Manual-FEATURED

LUXPRO PSD011B Programmable Thermostat Product Specifications

Luxpro-LOGO

LUXPRO PSD011B Programmable Thermostat 

LUXPRO-PSD011B-Programmable-Thermostat

Product Highlights

  • Digital thermostat with a large easy-to-read display with backlight.
  • Temperature control set from factory at a fixed value of +/- 0.5° F/C.
  • Battery Powered Only version.

Product Features

  • 1 Stage Heat / 1 Stage Cool
  • Battery Powered Only
  • Large Illuminated Digital Display
  • Attractive Slim Design
  • Soft Touch Buttons
  • Default Set Temps: 65F Heat / 78F Cool
  • Fahrenheit/Celsius Switchable
  • Adjustable Temperature Stops
  • 5 Minute Compressor Protection
  • Easy Installation
  • Optional Wall Plate Available

Installation

Compatible With 

  • Most 24V Heating and A / C Systems
  • 1 Stage Heat / 1 Stage Cool: Gas, Oil, Electric, or Single Stage Heat Pump Systems
  • 2 Wire Heat Only Hydronic Systems (Hot Water Baseboard & Radiator)
  • Millivolt Systems (Wall Heaters / Furnaces & Gas Fireplaces)

Not Compatible With 

  • Multi-stage Heat Pumps
  • 3 Wire Hydronic Systems
  • Line Voltage Systems (120 / 240 VAC)

SPECIFICATIONS LUXPRO-PSD011B-Programmable-Thermostat-fig-1

Dimensions 3.25″ (83mm) wide x 5.05″ (128mm) tall x 1.10″ (28mm) deep Wall plate: 4.50″ (114 mm) wide x 5.45″ (138 mm) tall
Heat/Cool Terminals RH, RC, W1, Y1, G, O/B
Electrical Ratings 11⁄2 AMPS at each terminal, 3 AMPS total 24 VAC Battery Powered Only: 2 “AA” Batteries
Temperature Control Range ■    Temp control 45° F to 90° F (7° to 32° C)

accuracy +- 1° over a range of 45° F to 90° F.

Environmental Limits ■    Moisture and Dust: meets IP20

■    Operating Humidity: 20% to 90% (non-condensing)

■    Operating Temperature: +14°F to +122°F (-10°C to +50°C).

■    Storage Temperature: -4°F to +140°F (-20°C to +60°C).

■    Electrical Immunity: meets relevant CE specifications.

Compatibile With ■    24V Heating and A / C Systems

■    1 Stage Heat / 1 Stage Cool: Gas, Oil, Electric, or Single Stage Heat Pump Systems

■    2 Wire Heat Only Hydronic Systems (Hot Water Baseboard & Radiator)

■    Millivolt Systems (Wall Heaters / Furnaces & Gas Fireplaces)

Not Compatibile With ■    Multi-stage Heat Pumps

■    3 Wire Hydronic Systems

■    Line Voltage Systems (120 / 240 VAC)

Packaging ■    Master Carton: Master Carton: 10 units

■    UPC:

WARNING: Use Energizer® or DURACELL® Alkaline Batteries Only.
Energizer® is a registered trademark of Eveready Battery Company, Inc. – DURACELL® is a registered trademark of The Gillette Company, Inc

4747 South Broad Street I Building 101 – Suite 330 I Philadelphia,
PA 19112 I P: 856.234.7905 I F: 856.234.7825
LuxProProducts.com 

Reference

Download manual:

LUXPRO PSD011B Programmable Thermostat Product Specifications

Luxpro-LOGO

LUXPRO PSD011B Programmable Thermostat Product Specifications

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

To respond on your own website, enter the URL of your response which should contain a link to this post’s permalink URL. Your response will then appear (possibly after moderation) on this page. Want to update or remove your response? Update or delete your post and re-enter your post’s URL again. (Find out more about Webmentions.)