Honeywell-Aube-TH140-Programmable-Thermostat-featured

Honeywell Aube TH140 Programmable Thermostat Specification Guide

HoneyWell

Honeywell Aube TH140 Programmable Thermostat 

Honeywell-Aube-TH140-Programmable-Thermostat

MODEL & RATINGS

TH140-28-01

  • 5 A (resistive) @ 24 V, 120 V, 240 V
  • 2 A (inductive) @ 24 V, 120 V, 240 V R, W World except France

SPECIFICATIONS

  • TEMPERATURE CONTROL
  • PROPORTIONAL ADAPTIVE
  • Cycles: selectable 5, 10, 15 or 20 minutes
  • CONVENTIONAL WITH ANTICIPATION
  • Programmable temp. span: ± 0.3ºC (0.5ºF) to ± 0.6ºC (1.1ºF)

PROGRAMMING
7-day, up to 4 time periods, 2 temps. / day
Selectable 12- or 24-hour format, ºC or ºF

POWER SUPPLY
2 AA batteries (not included)

DIMENSIONS (H•W•D)
126 x 97 x 26 mm / 4.9 x 3.8 x 1 inches

FEATURES

Advanced temperature control ensures total comfort by minimising temperature swings
Selectable cycles mean thermostat can be optimised to heating system
Pump protection – for hot water heating activates pump for one minute every 24 hours to prevent seizure
Armchair programming – convenient programming by removing faceplate from base

Instructions inside front panel enable quick, easy programming

Precise LCD – shows room temperature in increments of 0.1ºC or 0.1ºF
Low battery indicator – gives 60 days warning to replace batteries
Remote input enables change of temperature modes from phone (Aube telephone controller required) or alarm/automation system (12 VDC transformer required)

ACCESSORIES

Aube CT240 telephone controller
Aube RC840 electromechanical relay
Aube RC840T electromechanical relay

  • TH140-28.pdf (format PDF)
  • To view a PDF, you must have Acrobat Reader. Click on the icon to download it for free.

Warranty 3 Year Watranrt

CERTIFICATION

References

Download Manual

Honeywell Aube TH140 Programmable Thermostat Specification Guide

Honeywell-Aube-TH140-Programmable-Thermostat-1

HoneyWell

Honeywell Aube TH140 Programmable Thermostat Specification Guide

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

To respond on your own website, enter the URL of your response which should contain a link to this post’s permalink URL. Your response will then appear (possibly after moderation) on this page. Want to update or remove your response? Update or delete your post and re-enter your post’s URL again. (Find out more about Webmentions.)