Sensi-WG4-Wifi-Touch-Smart-Thermostat-FEATURED

Sensi WG4 Wifi Touch Smart Thermostat Product Data Sheet

SENSI LOGO

Sensi WG4 Wifi Touch Smart Thermostat

Sensi-WG4-Wifi-ToucH-Smart-Thermostat-PRODUCT

SPECIFICATION

  • Program Options:Programmable – 7 Day or Non-Programmable
  • Program Periods Per Day Options:8 Max
  • Hardwire:30 Vac, NEC Class II, 50/60 Hz
  • Battery Power Rating:N/A
  • 3-Wire Zone Valve Connections: Yes
  • Millivolt Compatible:No
  • Economizer Connections:No
  • Humidity Control: Displays only humidity
  • Heat Pump Dual Fuel Control: Yes (Remote Sensor Not Required)
  • Heat Pump Auxiliary Lockout Control – Outdoor Sensor Optional: None
  • Remote Sensor Options: None
  • Auto Changeover (Heat/Cool): Yes
  • Fan Option: Auto, On
  • Filter Change Reminder: Yes
  • Early Start N: Yes
  • Keypad Lockout: Total Lockout
  • Set-Point Temperature Limits: No
  • Backlight: Color
  • Terminals:RC, RH, C, W/E, W2, Y, Y2, O/B/6, G, L: Voltage 30 Vac, NEC Class II, 50/60 Hz
  • Amp Rating:1.5A per terminal, 2.5A maximum all terminals combined
  • Rated Differential, Universal: Heat (Conventional Gas, Oil, Electric): 0.5°F (Fast) 0.75°F (Med) 1.9°F (Slow); Cool (Central Air): 0.9°F (Fast) 1.2°F (Med) 1.7°F (Slow); Heat Pump: 0.9°F (Fast) 1.2°F (Med) 1.7°F (Slow); Aux. Heat: 0.5°F (Fast).
  • Ambient Operating Temperature :32° to 105°F (0 to 40°C)
  • Operating Humidity:90% non-condensing maximum

REFERENCE

DOWNLOAD MANUALS:

Sensi WG4 Wifi Touch Smart Thermostat Product Data Sheet

OTHER MANUALS:

Sensi WG4 Wifi Touch Smart Thermostat Installation Manuals

SENSI LOGO

Sensi WG4 Wifi Touch Smart Thermostat Product Data Sheet


Posted

in

by

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

To respond on your own website, enter the URL of your response which should contain a link to this post’s permalink URL. Your response will then appear (possibly after moderation) on this page. Want to update or remove your response? Update or delete your post and re-enter your post’s URL again. (Find out more about Webmentions.)