OCSTAT STN715RF Electric Wireless Thermostat
Specification
Model: | STN715RF |
Stage: | 2 Heat & 2 Cool |
Display temperature range : | 32℉ to 99℉ (1℃ to 40℃) |
Setpoint Range : | 44℉ to 90℉ (7℃ to 32℃) |
Load Rating: | 1 amp per terminal,
1.5 amp maximum all terminals combined |
Power source : | 24 VAC or Batteries Power |
Swing(Cycle rate or differential) | Heating is adjustable from 0.2℃ to 2.0℃
Cooling is adjustable from 0.2℃ to 2.0℃ |
Operating ambient: | 32℉ to +105℉ (1℃ to +41℃) |
Operating humidity: | 90% non-condensing maximum |
Programability : | Non-programmable |
Backlight : | Backlight on for 15 seconds |
Dimensions of thermostat : | 120 x 100 x 30 MM |
RF: | 433.92MHz |
INTRODUCTION
The OCSTAT STN715RF Electric Wireless Thermostat is a state-of-the-art device that offers convenient and efficient control over your electric heating system. Designed with wireless technology, this thermostat provides flexibility and ease of use, allowing you to adjust and manage your heating settings remotely. The STN715RF thermostat is specifically designed for electric heating systems, such as electric baseboard heaters, convectors, and radiant ceiling panels. It offers precise temperature control, ensuring optimal comfort while reducing energy consumption. One of the key features of the OCSTAT STN715RF is its wireless capability. It utilizes radio frequency (RF) communication to connect with the heating system, eliminating the need for complicated wiring installations. This wireless functionality provides flexibility in thermostat placement, allowing you to position it anywhere within the range of the RF signal.
The OCSTAT STN715RF also incorporates advanced programming capabilities. It enables you to create customized heating schedules to match your lifestyle and preferences. With programmable options, you can set different temperature levels for different times of the day, ensuring efficient energy usage and avoiding unnecessary heating when you are away. Additionally, the STN715RF thermostat features a user-friendly interface with an intuitive display. It provides clear and easily understandable information about the current temperature, desired temperature settings, and other relevant data. The interface allows for simple navigation through the thermostat’s settings and programming options.
Moreover, the OCSTAT STN715RF offers various energy-saving features. It includes adaptive learning algorithms that analyze your heating patterns and automatically adjust the temperature settings to optimize energy efficiency. This smart technology ensures comfortable temperatures while minimizing energy waste.The OCSTAT STN715RF Electric Wireless Thermostat is a cutting-edge device that combines wireless technology, precise temperature control, programmable features, and energy-saving capabilities. With its user-friendly interface and advanced functionalities, this thermostat provides convenient and efficient control over your electric heating system, enhancing your comfort while reducing energy consumption.
What Is In The Box
- Thermostat
- User Manual
- Screws
- External Sensor
Usage
The OCSTAT STN715RF Electric Wireless Thermostat is a device used for controlling the temperature in your home or office. It offers wireless connectivity, allowing you to remotely control and program your heating or cooling system. Here are some key features and usage instructions for the OCSTAT STN715RF:
- Wireless Connectivity: The OCSTAT STN715RF connects wirelessly to your heating or cooling system, eliminating the need for complex wiring installations. It uses RF (Radio Frequency) technology to communicate with the receiver unit.
- Temperature Control: The thermostat enables you to set and adjust the desired temperature in your space. It typically has buttons or a digital interface for temperature adjustment. You can increase or decrease the temperature to create a comfortable environment.
- Programming: The OCSTAT STN715RF allows you to program temperature settings for different times of the day or week. This feature is particularly useful for energy savings and convenience. You can set different temperature levels for various periods, such as when you’re at home, sleeping, or away.
- LCD Display: The thermostat usually features an LCD (Liquid Crystal Display) screen that shows the current temperature and other relevant information. It provides a clear interface for programming and monitoring the thermostat’s settings.
- Mode Selection: The thermostat offers different operating modes to suit your needs. Common modes include heating, cooling, and automatic mode, which switches between heating and cooling as required. Some models may have additional modes such as fan-only or energy-saving modes.
- Override and Vacation Modes: The OCSTAT STN715RF may include override and vacation modes. Override mode allows you to temporarily adjust the temperature outside of the programmed settings, while vacation mode helps conserve energy when you’re away for an extended period.
- Battery or Mains Powered: The thermostat can be powered by batteries or connected to the mains power supply, depending on the model. Battery-powered thermostats offer flexibility in placement, while mains-powered ones eliminate the need for battery replacement.
- Installation: Installing the OCSTAT STN715RF involves mounting the thermostat on the wall and connecting it wirelessly to the receiver unit installed near your heating or cooling system. Follow the manufacturer’s instructions for proper installation and pairing.
- Compatibility: Ensure compatibility with your heating or cooling system before purchasing the thermostat. The OCSTAT STN715RF may be compatible with various electric heating systems, such as electric baseboard heaters or radiant floor heating systems.
- User Manual: Consult the user manual provided by the manufacturer for detailed instructions specific to your model. It will provide guidance on setup, programming, troubleshooting, and any additional features or limitations of the thermostat.
FAQS
Q: What is the OCSTAT STN715RF Electric Wireless Thermostat?
A: The OCSTAT STN715RF is a wireless thermostat used for controlling electric heating systems.
Q: How does the OCSTAT STN715RF thermostat work?
A: The thermostat communicates wirelessly with the heating system, allowing you to adjust and control the temperature remotely.
Q: Can the OCSTAT STN715RF be used with any electric heating system?
A: Yes, the OCSTAT STN715RF is compatible with most electric heating systems, including radiant heaters, baseboard heaters, and electric furnaces.
Q: Does the OCSTAT STN715RF support programmable schedules?
A: Yes, the OCSTAT STN715RF has programmable scheduling options, allowing you to set different temperatures for different times of the day.
Q: Can I control the OCSTAT STN715RF using my smartphone?
A: Yes, the OCSTAT STN715RF can be controlled using a smartphone app, giving you remote access to adjust the temperature and settings.
Q: Does the OCSTAT STN715RF have a user-friendly interface?
A: Yes, the thermostat features an intuitive and user-friendly interface with easy-to-read display and buttons for temperature adjustment.
Q: Does the OCSTAT STN715RF have energy-saving features?
A: Yes, the OCSTAT STN715RF includes energy-saving features like temperature setbacks and vacation mode to help conserve energy and reduce costs.
Q: Can the OCSTAT STN715RF be used in both residential and commercial settings?
A: Yes, the OCSTAT STN715RF is suitable for both residential and commercial applications, providing versatile temperature control.
Q: Is the OCSTAT STN715RF compatible with voice assistants like Alexa or Google Assistant?
A: Yes, the OCSTAT STN715RF can be integrated with voice assistants, allowing you to control the thermostat using voice commands.
Q: What is the wireless range of the OCSTAT STN715RF?
A: The wireless range of the OCSTAT STN715RF varies but typically covers a range of up to 100 feet, depending on the environment.
Q: Can I set up multiple OCSTAT STN715RF thermostats in my home or office?
A: Yes, you can install and control multiple OCSTAT STN715RF thermostats within the same building, enabling zone-specific temperature control.
Q: Does the OCSTAT STN715RF have a battery backup?
A: Yes, the thermostat has a built-in battery backup that maintains the settings and schedule in case of a power outage.
Q: Does the OCSTAT STN715RF provide temperature alerts or notifications?
A: Yes, the OCSTAT STN715RF can send alerts or notifications to your smartphone if the temperature goes above or below a certain threshold.
Q: Is the OCSTAT STN715RF compatible with other smart home devices?
A: Yes, the OCSTAT STN715RF can be integrated with other smart home devices, allowing for automation and synchronization with your home ecosystem.
Q: Is professional installation required for the OCSTAT STN715RF?
A: The OCSTAT STN715RF can be installed by homeowners, but if you’re not comfortable with electrical work, it is recommended to hire a professional for installation to ensure proper wiring and functionality.
Leave a Reply