OCSTAT STN601 Non-Programmable Room Thermostat
Introduction
The OCSTAT STN601 is a non-programmable room thermostat designed to control the temperature of a room or space. It is a simple and straightforward device that allows users to manually adjust and maintain the desired temperature in their environment. The STN601 thermostat is designed to be user-friendly and easy to operate. It typically features a digital display that shows the current temperature and allows users to adjust the temperature setting according to their preference. The thermostat is equipped with buttons or a dial that enables users to increase or decrease the temperature setting in increments. One of the key features of the OCSTAT STN601 is its non-programmable nature. Unlike programmable thermostats that allow users to set different temperature schedules throughout the day, the STN601 does not have this functionality. It provides a simple and manual control system, where users can manually adjust the temperature as needed.
The STN601 thermostat is commonly used in residential and commercial settings where a basic and reliable temperature control solution is required. It is often used in rooms or spaces where consistent temperature control is desired without the need for complex programming or scheduling features. The OCSTAT STN601 non-programmable room thermostat offers a straightforward and convenient solution for maintaining temperature control in a room or space. Its simplicity and ease of use make it a popular choice for those seeking a basic and reliable thermostat option.
Specification
- Model No: STN601
- Programmability: Non Programmable
- Temperature Range (˚F): 32˚F-99˚F (1°C-40°C)
- Control Temp.Range (˚F): 44˚F-90˚F (7°C-32°C)
- Temp.Meas.Accuracy: ±1°C (at 20°C)
- Power Source: DC 2 x AAA 1.5V Alkaline batteries
- 24VAC (18~30VAC), 50/60 Hz for hardwire (common wire)
- Dimensions: 120 x98 x28 mm
What Is In The Box
- Thermostat
- User Manual
- Screws
- External Senso
Feature
- Single Stage
- 1 Heat / 1 Cool
- Non-programmable
- Batteries or 24V power
- Large, easy to read clear LCD display
- Various backlight colors optional
- Electric or Gas configurable
- Separate B & O terminals
- Separate heating and cooling swing (cycle rate)adjustments
- Room temperature calibration adjustable
- 5-minute compressor delay protection (selectable on or off)
- Contemporary design
Usage
The OCSTAT STN601 is a non-programmable room thermostat designed to control the temperature in a specific room or area. Here are some details and usage information about the OCSTAT STN601:
- Basic Function: The STN601 thermostat allows you to manually set and adjust the desired temperature in a room. It provides a simple and straightforward way to control the heating or cooling system based on your comfort requirements.
- Temperature Control: The thermostat features a temperature control knob or buttons that allow you to increase or decrease the temperature setting. It typically has a clear temperature display that shows the current room temperature.
- Non-Programmable: Unlike programmable thermostats, the STN601 does not offer scheduling or programming capabilities. It does not have the ability to automatically adjust temperature settings based on specific time periods or days of the week.
- Manual Operation: The thermostat requires manual input from the user to set and adjust the temperature. You can turn the knob or press the buttons to select the desired temperature level.
- Compatibility: The OCSTAT STN601 is compatible with various heating and cooling systems, such as central heating systems, electric heaters, or air conditioning units. It is essential to ensure compatibility with your specific system before installation.
- Installation: The installation process for the STN601 thermostat typically involves wiring the thermostat to your heating or cooling system. It is recommended to consult the user manual or seek professional assistance to ensure proper installation and avoid any damage to the equipment.
FAQS
Q: What is the OCSTAT STN601 Non-Programmable Room Thermostat?
A: The OCSTAT STN601 is a non-programmable room thermostat used for controlling the temperature of a room or space.
Q: How does the OCSTAT STN601 thermostat work?
A: The thermostat senses the current room temperature and activates the heating or cooling system to maintain the desired temperature set by the user.
Q: What type of heating/cooling systems is the OCSTAT STN601 compatible with?
A: The OCSTAT STN601 is compatible with most conventional heating and cooling systems, including gas, oil, electric, and heat pump systems.
Q: Does the OCSTAT STN601 support multiple temperature settings?
A: No, the OCSTAT STN601 is a non-programmable thermostat, which means it does not have multiple temperature settings or scheduling features.
Q: How accurate is the temperature sensing of the OCSTAT STN601?
A: The OCSTAT STN601 is designed to provide accurate temperature sensing within a specified range, typically within ±1 degree Celsius or Fahrenheit.
Q: Can the OCSTAT STN601 be used in both residential and commercial settings?
A: Yes, the OCSTAT STN601 is suitable for use in both residential and commercial environments.
Q: Does the OCSTAT STN601 have a backlight display?
A: The presence of a backlight display may vary depending on the specific model or version of the OCSTAT STN601. Some models may have a backlight feature for improved visibility.
Q: Is the OCSTAT STN601 battery-powered or does it require a wired connection
? A: The OCSTAT STN601 is typically powered by batteries, but some models may also offer the option for a wired connection.
Q: Can the OCSTAT STN601 be used with a fan system?
A: Yes, the OCSTAT STN601 can be used to control a fan system in addition to the heating or cooling system.
Q: Is the OCSTAT STN601 compatible with smart home systems or voice assistants?
A: No, the OCSTAT STN601 is a non-programmable thermostat and does not have smart home integration or voice control capabilities.
Q: What is the temperature range that the OCSTAT STN601 can control?
A: The temperature range of the OCSTAT STN601 may vary, but it is typically designed to control temperatures within a range of 10 to 30 degrees Celsius or 50 to 86 degrees Fahrenheit.
Q: Can the OCSTAT STN601 be used to control both heating and cooling systems simultaneously?
A: No, the OCSTAT STN601 is designed to control either a heating or cooling system at a given time, depending on the user’s settings.
Q: Does the OCSTAT STN601 have any energy-saving features?
A: As a non-programmable thermostat, the OCSTAT STN601 does not have specific energy-saving features like scheduling or occupancy detection.
Q: Is the OCSTAT STN601 easy to install?
A: The installation process of the OCSTAT STN601 may vary depending on the wiring configuration of your heating or cooling system. It is recommended to follow the provided installation instructions or consult a professional if needed.
Q: Does the OCSTAT STN601 come with a warranty?
A: The warranty coverage for the OCSTAT STN601 may vary depending on the manufacturer or vendor
Leave a Reply