MOES Tuya Smart WiFi Radiator Thermostat

Wi-Fi Smart Thermostatic Radiator Valve

• Automatic debugging function, suitable for all kinds of mainstream valves
• The device supports Wi-Fi fast distribution network, no additional gateway is required
• Intelligent PID algorithm, efficient control of valve opening and closing, energy saving and environmental protection
• The motor adopts ultra—quiet technology to minimize noise pollution
• The device has activated the automatic conversion of summertime and wintertime, which can be activated or terminated as needed.

Technical Specification

• Power Supply:3 x 1.5 V alkaline AA batteries (not included)
• Protection Degree:IP20
• Ambient Temperature:0-500
• Surface Temperature:900 Max (at the radiator)
• Connection:M30 x 1.5mm
• Linear Travel:4.3mm
• Dimensions(W x H x D):58.4mm x 97mm x 58.4mm
• Weight:117.7 g

STANDARD ACCESSORIES

DISPLAY Symbols

Installation

1. Press the battery compartment lock, remove the cover, and insert the batteries.
2. Initialize, the mandrel pulls back, then “, ” is displayed and blinking on the screen.
   

   

3. When “ ” stop blinking, install the TRV union nut with M30*1.5 thread for the heating valve, and then tighten the nut.
4. Press the middle button and then” n “start blinking, freeing the device to enter valve—adjusting process. After several minutes, the process is completed when the initialized screen is displayed.

How to install the adapter correctly

Temperature control mode

Press the middle button to switch between Auto mode and Manual mode.

ATTENTION:

Only Manual mode is available when the device is not connected to the Internet.

• Auto mode
  When is displayed on the screen, it is under Auto mode.
  Four time periods and setting temperatures could be programmed per day, one week as a cycle, based on customized needs.
• Manual mode
  When”“is not displayed on the screen, it is under Manual mode.
  The device will work according to current setting the of nature, without being controlled bv the time period program.
• Temporary mode:
  Under auto mode will be blinking after setting the temperature, ad then will it enter temporary mode. The device is switched to manual mode temporarily, without control by the time period program.

Stop heating and pause heating

• ON: In summer, rotate the knob clockwise until is displayed under manual mode to stop heating. At this time, the heating valve is fully open. This can extend the use life of the valve.
• Off: In winter, rotate the knob counterclockwise until ” is displayed under manual mcxle to pause heating temporarily. At this time, the heating valve is closed and the front protection is activated.
  ATTENTION: After the antifreeze function is activated, the valve will open when the room temperature is lower than 50C, and the valve will be closed when the room temperature exceeds TC to prevent damage to the radiator thermostatic valve due to freezing.

Adjust the setting temperature and Screen rotation

• Adjust getting temperature: Rotate the knob to adjust the setting temperature, stepping by 0.50.
• Screen rotation: Long press the Set Button for 3 seconds to switch the screen display direction.

Open—window function and Anti-scale

Open—window function: First, enter the APP home page to tum on the window detection function, the device will automatically identify whether the is open. When it is detected that there is cold wind, and the temperature drops by more than 1 SC within 4.5 min, the open—window function will be activated. At this time, the screen displays, and the temperature is set to 1 20C.

Attention: While the open-window function is activated, the following questions will terminate it from taking effect.

1. Temperature setting operation on the APP or device.
2. The detected temperature rises by more than 1 SC within 4.5 minutes.
3. No 0Fvation on the APP or device within 30 minutes.

 

Anti-scale

TRV exawtæ routine deælcification every Monday at 12:00 to protect the val’Æ from ælcifiætion. ‘T F/ ” will be displayed on the scræn during decalcification.

Child lock function and Restore factory settings

• Child lock function: Long press the middle button for 3 seconds until “LL ” is displayed on the screen to activate the child lock. While the device is locked Long press the middle button for 3 seconds until “LC” disappear to deactivate the child lock.
• RESTORE Factory Setting: Long press the middle button and insert the battery at the same time until ” FR” is displayed on the screen and blinking for 3 seconds, the &vice will be restored to factory settings and restarted.
  Attention: Once the device is restored to factory settings, previous settings can not be recovered.

App Remote Control and Voice Changer

Download Smart Life App

Scan the QR code above or search “Smart Life” on App Store and Google Play to download the Smart Life APP.

Add Devices

1. Under manual mode, rotate the knob counterclockwise until “OF” is displayed. Then long press the middle button for 3 seconds until “WIFI” is blinking.
   Network configuration can only be done under manual mode.
   Please turn on the Bluetooth of your phone in advance.
2. Enter the ” Home” interface of the APP, click ” +” in the upper right comer, select the ” Add ” button in the pop—up window, and finally click ” +” to enter the Wi-Fi interface;
3. Select 2.4G Wi—Fi and enter the password, click “Next”, and then wait for the connection to succeed.
4. After the addition is successful, click “Next” , and the wifi smart thermostat has been added successfully.

Mode Selection

Click “A” to select mode.

• Attention: Click ” + “or “-” to adjust the setting temperature.
• Auto mode: Four-time periods and setting temp. could be programmed per day, one week as a cycle, based on customized needs.
• Manual mode: The device will work according to the current setting temp. without being controlled by the time period program.
• Off mode: The valve will be closed to stop heating.
• ON mode: The valve will open in heating.

Week program setting

1. Click the to enter the week program setting page.
2. Set four time periods and setting based on customized

Advanced Setting

Statistics

Device Sharing Function

Voice Control

After waking up the speaker, you can say:

Amazon Alexa: Alexa,

• Set the DEVICE-NAME to 26 degree
• Drop the DEVICENAME by 1 degree
• Raise the DEVICENAME by 1 degree
• Make the DEVICENAME warmer
• Turn on the DE-VICENAME child lock
• Turn off the DEVICE-NAME child lock
• What temperature is the DEVICENAME  set to
• What is the battery on the device name

Google Assistant : 0K google,

• Set the devicename to 23
• Turn on the DEVICE-NAME child lock
• Turn off the DEVICENAME child lock
• IS my DEVICENAME child locked on?
• Turn on the child lock for the devicename
• Tum off child lock for the devicename
• Set the devicename to auto
• Set the devicename to manual

*Attention: “DEVICE NAME” is the device you can also nanne it yourself.
The temperature unit of TRV and srnart speaker must be identical.

Troubleshooting and maintenance

REFERENCE

DOWNLOAD MANUALS:

MOES Tuya Smart WiFi Radiator Thermostat USER MANUAL

MOES Tuya Smart WiFi Radiator Thermostat USER MANUAL