Meitay-tec ETN24-SUPER-3S-FP-PROG Programmable ThermostAT-FEATURED

Meitay-tec FMH-220-HC11-3S-IR Non-Programmable Thermostat Product Specification Guide

Meitay-tec logo

Meitay-tec FMH-220-HC11-3S-IR Non-Programmable Thermostat 

Meitay-tec FMH-220-HC11-3S-IR Non-Programmable Thermostat   PRO

INTRODUCTION

Flush Mount, 220VAC thermostat with Heat and Cool outputs, 3 fan speeds and IR option The FMH-220-HC11-3S-IR is a fully featured, flushmount thermostat suitable for commercial or residential applications to control a large variety of HVAC systems. This easy to operate thermostat has one output for Cool and one output for Heat Element (On/Off), 3 fan speeds and IR option. The FMH-220-HC11-3S-IR is a smart looking thermostat with a soft aesthetic shape and a large, easy to read LCD display.

Features

  • Flush mount, 230VAC thermostat
    • 2 separate outputs for Cool and Heat
    • 3 Fan Speeds
  • Remote Control – option
  • Temperature offset – adjustable
  • Daily, digital Timer from RC – optimal when you are asleep or awa
  • Energy saving – cost efficient, environmental friendly thermostat
  • 3 minutes compressor delay (to protect the compressor)
    • Auto fan – selectable
    • Auto speed – selectable
  • Type of heater (electric heater or oil heater) – selectable

Wiring diagram

Meitay-tec FMH-220-HC11-3S-IR Non-Programmable Thermostat  1

REFERENCE:

DOWNLOAD MANUALS:

Meitay-tec FMH-220-HC11-3S-IR Non-Programmable Thermostat Product Specification Guide

OTHER MANUALS:

Meitay-tec FMH-220-HC11-3S-IR Non-Programmable Thermostat Operating Instructions

Meitay-tec logo

Meitay-tec FMH-220-HC11-3S-IR Non-Programmable Thermostat Product Specification Guide

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

To respond on your own website, enter the URL of your response which should contain a link to this post’s permalink URL. Your response will then appear (possibly after moderation) on this page. Want to update or remove your response? Update or delete your post and re-enter your post’s URL again. (Find out more about Webmentions.)