LUXPRO-PSP300-ELECTRONIC-Thermostat-Product-Specifications-featured

LUXPRO PSP300 ELECTRONIC Thermostat Product Specifications

Luxpro-LOGO

LUXPRO PSP300 ELECTRONIC Thermostat

LUXPRO-PSP300-ELECTRONIC-Thermostat-Product-Specifications-product

Product Highlights

  • Programmable outlet thermostat allows control of window air conditioning units and portable space heaters.
  • Temperature control adjustable.
  • Plugs into normal 120-volt, 15-amp electrical outlet.
  • ETL listed.

Product Features

  • Designed for Window Air Conditioners and Portable Space Heaters – 120 Volt 15A Units
  • Easy-to-Use Lux Speed Dial®
  • 5/2 Programming – Weekdays and Weekends Can Be Programmed Differently
  • Armchair Programmable
  • Easy to Reprogram
  • Separate Programs for Heating and Cooling
  • Clean, Attractive Design
  • Energy Star® Compliant
  • ETL Approved
  • Vertical Orientation
  • Setting Range 45°F to 90°F (7°C to 32°C)
  • F/C Selectable
  • Temporary Temperature Override
  • Manual Hold
  • 12-Hour Clock Only
  • User Temperature Calibration
  • Adjustable Temperature Differential/Cycle Rate
  • Mode Slide Switch
  • Positive On/Off Switch
  • 120VAC Outlet Powered
  • 2 G13A Size 1.5V Alkaline Batteries Included (for the clock only)
  • battery Free Memory Storage
  • 5 Minute Compressor Delay
  • Time and Temperature Alternate in Display
  • On-Screen Low Battery Indicator
  • Soft Touch Buttons

Installation

Compatible With

  • All mechanically controlled: 120Volt, 15 Amp, 60 Hz, window air conditioning units, and portable space heaters.
  • It is also compatible with electronically controlled: 120Volt, 15 Amp, 60 Hz, window air conditioning units that have an automatic restart of cooling after power resumption**.

Not Compatible With

  • It cannot be used with electronically controlled space heaters, or window air conditioning units that do not have an automatic restart of cooling after power resumption**.
  • In addition, it cannot be used with conventional 24 Volt heating/cooling systems, hydronic systems, or heat pumps.

SPECIFICATIONS

LUXPRO-PSP300-ELECTRONIC-Thermostat-Product-Specifications-fig-1

Dimensions 3.0″ (76mm) wide x 5.25″ (133mm) tall x 2.75″ (70mm) deep Unit Total / 1.80″ (48mm) depth – when plugged in.
Electrical Ratings The unit is directly powered by the 120V outlet. (2) 1.5V G13 alkaline button cell batteries (included) are for maintaining the clock only.
Temperature Control Range Temp control 45° F to 90° F (7° to 32° C) accuracy +- 1° over a range of 45° F to 90° F.
Environmental Limits Moisture and Dust: meets IP20
Operating Humidity: 20% to 90% (non-condensing)
Operating temperature: 14°F to 122°F (-10°C to 50°C)
Storage temperature: -4°F to 140°F (-20°C to 60°C)
Electrical Immunity: meets relevant EMI/EMC specifications
Compatible With All mechanically controlled: 120Volt, 15 Amp, 60 Hz, window air conditioning units and portable space heaters.
It is also compatible with electronically controlled: 120Volt, 15 Amp, 60 Hz, window air conditioning units that have an automatic restart of cooling after power resumption**.
Not Compatible With It cannot be used with electronically controlled space heaters, or window air conditioning units that do not have automatic restart of cooling after power resumption**.
In addition, it cannot be used with conventional 24 Volt heating/cooling systems, hydronic systems, or heat pumps.
Packaging Master Carton:
UPC:

NOTE: Electronically controlled units can usually be identified by their digital readout. To learn whether a particular model offers automatic restart of cooling or heating after power resumption, refer to their manual or manufacturer.4747 South Broad Street I Building 101  Suite 330 I Philadelphia, PA 19112 I P: 856.234.7905 I F: 856.234.7825

REFERENCE

Download Manual

LUXPRO PSP300 ELECTRONIC Thermostat Product Specifications

Luxpro-LOGO

LUXPRO PSP300 ELECTRONIC Thermostat Product Specifications


Posted

in

by

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

To respond on your own website, enter the URL of your response which should contain a link to this post’s permalink URL. Your response will then appear (possibly after moderation) on this page. Want to update or remove your response? Update or delete your post and re-enter your post’s URL again. (Find out more about Webmentions.)