Insbud Controls NPTR5100 Non-programmable Room Thermostat User Manual

Insbud Controls NPTR5100 Non-programmable Room Thermostat  

Introduction

The STH133 is a programmable touch screen thermostat used for 2-position control with on/off output for the control the temperature by means of an NTC sensor placed externally or internally in the thermostat. The thermostat acquires the actual temperature with its built-in sensor or floor sensor, and the heating contact will close when the room temperature falls below the selected setpoint.

The Insbud Controls STH133 is an advanced touch screen thermostat designed to provide precise and convenient temperature control for residential and commercial heating and cooling systems. With its modern and intuitive touch screen interface, this thermostat offers a user-friendly experience, making it easy for users to program and adjust temperature settings according to their preferences and daily routines.

The STH133 Touch Screen Thermostat comes equipped with a range of features that promote energy efficiency and optimal comfort. Its innovative touch screen display allows for quick and effortless navigation, giving users easy access to temperature settings, scheduling options, and other programmable features. The thermostat boasts a sleek touch screen display, providing a modern and interactive way to control temperature settings. With programmable schedules and temperature adjustments, users can optimize energy usage and minimize waste. The thermostat is compatible with various heating and cooling systems, including furnaces, air conditioners, heat pumps, and more.

The STH133 offers precise temperature adjustments in small increments, allowing users to maintain a comfortable indoor environment. Advanced versions of the thermostat may offer Wi-Fi connectivity, enabling remote control and access through mobile apps or smart home systems. The thermostat is designed for easy installation and initial setup, making it accessible to a wide range of users. Users can manually override the programmed settings temporarily, allowing for quick adjustments based on immediate needs. ome models may include data logging capabilities, providing users with insights into their HVAC system’s performance and energy consumption

What Is In The Box

• Thermostat
• User Manual
• Screws
• External Sensor

Specifications

• Power Consumption: < 2W
• Accuracy: +/- 1 C
• Power Supply: 220V AC + 15% 50/60Hz
• 120V AC optional
• Max load: 16amps
• Dimension: 86X86X13 MM
• Set-Point Range: 5 ~ 35°C (A); 5 ~40°C (AF,F)
• Agency Approval: CE compliant

Features

• Non-programmable
• The heating status indicator icon
• Time display
• Large LCD display(66x49mm visible)
• Large easy-to-use buttons
• Flush mounting
• Microprocessor based
• Switching differential settings
• C / F temperature mode selection
• A/AF/F model selection
• Reliable separate power unit
• Optional blue back light
• Customizing available

Usage

The Insbud Controls NPTR5100 Non-programmable Room Thermostat is designed to provide simple and straightforward temperature control for heating and cooling systems in a room. Here’s how to use it:

• Installation: Before use, ensure the thermostat is properly installed following the manufacturer’s guidelines or seek professional installation if needed. Typically, it involves mounting the thermostat on a wall and connecting it to the HVAC system.
• Power: Ensure the thermostat has power by inserting the required batteries or connecting it to a power source if it has a wired option.
• Temperature Setting: The NPTR5100 has buttons or a dial to set the desired temperature. You can adjust the temperature up or down to your comfort level.
• Mode Selection: The thermostat may have different operating modes for heating and cooling. Choose the appropriate mode based on the season and your requirements.
• Wait for Activation: Once you set the desired temperature and mode, the thermostat will wait until the current room temperature deviates from the setpoint to activate the HVAC system.
• Heating/Cooling Activation: When the room temperature falls (in heating mode) or rises (in cooling mode) below or above the set temperature, the thermostat will signal the HVAC system to turn on and maintain the desired temperature.
• Temperature Display: The thermostat will display the current room temperature and the setpoint temperature.
• Manual Adjustment: If you want to adjust the temperature, you can do so manually by pressing the temperature adjustment buttons or turning the dial.
• No Programming: Unlike programmable or smart thermostats, the NPTR5100 does not have a built-in schedule or learning capabilities. It maintains a constant temperature based on your manual input.
• No Remote Control: Since it’s a non-programmable thermostat, you cannot control it remotely through a smartphone or internet connection.
• Maintenance: Periodically check the thermostat’s battery status (if applicable) and replace them when needed. Keep the thermostat clean and free from dust for accurate temperature sensing.
• Override: Some models may have an override feature, allowing temporary adjustments in the set temperature for specific periods before it reverts to the original setting.
• Lockout Feature: If your thermostat has a lockout feature, you can activate it to prevent tampering with the settings, which can be useful in commercial settings or to prevent unauthorized changes.

FAQS

Q1: What is the Insbud Controls NPTR5100 Non-programmable Room Thermostat used for?
A: The Insbud Controls NPTR5100 Non-programmable Room Thermostat is used for controlling the temperature of a room in heating or cooling systems.

Q2: How does the NPTR5100 thermostat operate?
A: The NPTR5100 thermostat operates by sensing the room’s temperature and activating the heating or cooling system to maintain the desired setpoint.

Q3: Is the NPTR5100 thermostat programmable?
A: No, the NPTR5100 thermostat is non-programmable, meaning it does not have a scheduling feature for different temperature settings at different times.

Q4: What power source does the thermostat require?
A: The NPTR5100 thermostat is typically powered by batteries, eliminating the need for a wired connection to the electrical system.

Q5: Can the thermostat be used in both residential and commercial applications?
A: Yes, the NPTR5100 thermostat is suitable for use in both residential and commercial settings.

Q6: What temperature range does the NPTR5100 thermostat support?
A: The thermostat typically supports a temperature range from 5°C to 35°C (41°F to 95°F).

Q7: Does the NPTR5100 have a backlit display?
A: The availability of a backlit display may vary depending on the specific model or version, so it’s essential to check the product specifications.

Q8: What type of heating or cooling systems is the NPTR5100 thermostat compatible with?
A: The NPTR5100 thermostat is compatible with various heating and cooling systems, including gas, oil, electric, and heat pumps.

Q9: Can the NPTR5100 thermostat be controlled remotely through a smartphone app?
A: As a non-programmable thermostat, it typically does not support remote control features like a smartphone app.

Q10: Does the NPTR5100 have a lockout feature to prevent tampering with the settings?
A: Some models of the NPTR5100 thermostat may come with a lockout feature, but it’s important to verify this in the product specifications.

Q11: Is the NPTR5100 thermostat compatible with multi-stage heating or cooling systems?
A: The thermostat may be compatible with multi-stage systems, but this also depends on the specific model and its capabilities.

Q12: How accurate is the temperature control of the NPTR5100 thermostat?
A: The NPTR5100 thermostat typically provides accurate temperature control within a few degrees of the setpoint.

Q13: Can the thermostat display temperature in both Celsius and Fahrenheit?
A: Yes, the NPTR5100 thermostat usually allows users to choose between Celsius and Fahrenheit temperature display.

Q14: Does the NPTR5100 have any energy-saving features?
A: As a non-programmable thermostat, it may not have advanced energy-saving features like programmable or smart thermostats.

Q15: Is professional installation required for the NPTR5100 thermostat?
A: The NPTR5100 thermostat can often be installed by homeowners; however, it is recommended to consult the user manual or seek professional assistance for proper installation and wiring.

Insbud Controls NPTR5100 Non-programmable Room Thermostat User Manual