Honeywell Home-RTH6350-Programmable-Thermostat-product 

Honeywell Home RTH6350 Programmable Thermostat Quick Installation Guide

Honeywell logo

Honeywell Home RTH6350 Programmable Thermostat 

Honeywell Home-RTH6350-Programmable-Thermostat-product 

Installation is Easy

  • Label wires and remove your old thermostat
  • Install and wire your new thermostat
  • Set your new thermostat to match your heating/cooling system
    It is preset for the most common system

We are here to help.
Call 1-800-468-1502 for wiring assistance before returning the thermostat to the store.Honeywell Home-RTH6350-Programmable-Thermostat-fig.1

  1. Turn Off Power to the Heating/Cooling SystemHoneywell Home-RTH6350-Programmable-Thermostat-fig.2
  2. Remove Old Thermostat
    Remove the old thermostat but leave the wallplate with wires attached.Honeywell Home-RTH6350-Programmable-Thermostat-fig.3
    MERCURY NOTICE: Do not place your old thermostat in the trash if it contains mercury in a sealed tube. Contact your local waste management authority for instructions regarding recycling and proper disposal.
  3. Label Wires with Tags
    Label the wires using the supplied wire labels as you disconnect them.Honeywell Home-RTH6350-Programmable-Thermostat-fig.4
    NOTE: Jumper wire used on old thermostat? If yes, note what letters the jumper connected and review in wiring section.
  4. Separate Wallplate from New ThermostatHoneywell Home-RTH6350-Programmable-Thermostat-fig.5
  5. Insert Quick Reference Card
    Insert quick reference card into the slot in back of the thermostat.Honeywell Home-RTH6350-Programmable-Thermostat-fig.6
  6. Mount Wallplate
    Mount the new wallplate using the included screws and anchors.Honeywell Home-RTH6350-Programmable-Thermostat-fig.7
    Drill 3/32-in. holes for plaster.
    Drill 3/16-in. holes for drywall.
    Use a hammer to tap the anchors into the wall.
  7. Connect Wires
    Simply match wire labels.Honeywell Home-RTH6350-Programmable-Thermostat-fig.8
    Labels don’t match? See page 23.
    Have a Heat Pump system? See pages 24-25.
    We are here to help.
    Call 1-800-468-1502 for wiring assistance.
  8. Install BatteriesHoneywell Home-RTH6350-Programmable-Thermostat-fig.9
  9. Install Thermostat onto Wallplate
    Install the thermostat onto the wallplate on the wall.Honeywell Home-RTH6350-Programmable-Thermostat-fig.10
  10. Turn Power Back On
    Turn the power back on to the heating/cooling system.Honeywell Home-RTH6350-Programmable-Thermostat-fig.11
  11. If your system type is…
    If your system type is:
    • Single Stage Heat and Cool
      Congratulations, you’re done!
      If your system type is:
    • Multistage Heat and Cool
    • Heat Pump* without Backup Heat
    • Heat Pump* with Backup Heat
    • Heat Only
    • Cool Only

Continue with advanced installation on page 13 to match your thermostat to your system type.
*Heat Pump—an air conditioner that provides cooling in the summer, and also runs in reverse in the winter to provide heating.
If you are not sure of your system type or if you have other questions, call us toll-free at 1-800-468-1502.
This thermostat works on 24-volt or 750 mV systems. It will NOT work on multi-stage heat pump systems or 120/240 Volt systems.

REFERENCE:

Download Manual:

Honeywell Home RTH6350 Programmable Thermostat Quick Installation Guide

other manuals:

Honeywell Home RTH6350 Programmable Thermostat Operating Manual

Honeywell logo

Honeywell Home RTH6350 Programmable Thermostat Quick Installation Guide

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

To respond on your own website, enter the URL of your response which should contain a link to this post’s permalink URL. Your response will then appear (possibly after moderation) on this page. Want to update or remove your response? Update or delete your post and re-enter your post’s URL again. (Find out more about Webmentions.)