BEOK- TDR89- Glass- Screen- Thermostat-pro-featured

BEOK TDR89 Glass Screen Thermostat Instruction Manual

logo - Copy - Copy

BEOK TDR89 Glass Screen Thermostat

BEOK- TDR89- Glass- Screen- Thermostat-pro -

Product Summary

TDR89 series thermostats are luxurious programmable thermostats with large-screen display. It is applied to temperature control of the industrial, commercial and domestic room, and start of control heating appliance, especially used in floor-heating systems.

Technical Parameter

  • Power Supply 100 ~ 240V
  • Current Load ≤3A(water heating/gas boiler) / ≤16A(electric heating)
  • Power Consumption <1W
  • External Material PC+ABS (flame retardant)
  • Sensing Element NTC
  • Set Temp. Range 5-95℃
  • Floor Set Temp. Range 5-60℃
  • Accuracy ±1℃
  • Dimension 86x90x14mm
  • Ambient Temp. 0-45℃,5-95%RH(Non-condensing)
  • Storage Temp. -5~55℃
  • Timing Error <1%

Main Functions and Characteristics

  1. Modern design same as a cell phone
  2. Large screen display and touch button
  3. Power-off memory function
  4. Real-time data save function
  5. 5+2 or 6+1or 7days six periods program schedule
  6. Anti-freezing function
  7. 3 sensor modes can be setting
  8. Selectable 80mmx80mm European hidden box.
  9. With child lock function

User Interface Explanation

BEOK- TDR89- Glass- Screen- Thermostat -fig -1

Model Definition

  • EP: For Electric Floor Heating System, 16A
  • WP: For Water Floor Heating System, 3A
  • WPB: For Gas Boiler Heating System, 3A

Model Spec

Model Current Loading External sensor Week Program Controlled Objects
TDR89-EP 16A For electric heating appliances
TDR89-WP 3A For water heating appliances
TDR89-WPB 3A For gas boiler

Wiring Diagram

BEOK- TDR89- Glass- Screen- Thermostat -fig -2

Thermostat Operation Instruction

  1. Setting Power on/off
    PressBEOK- TDR89- Glass- Screen- Thermostat -fig -3 to turn on/off the power.
  2. Setting Temperature
    Press “+” or “” to set the temperature.
  3. Setting the Clock
    Long pressBEOK- TDR89- Glass- Screen- Thermostat -fig -4 and “+” to set minute, hour and week. Press “+” or “” for adjusting.
  4. Setting the Manual Mode.
    Manual mode means non-programmable mode. PressBEOK- TDR89- Glass- Screen- Thermostat -fig -5 then BEOK- TDR89- Glass- Screen- Thermostat -fig -6will display in the screen, it is in manual mode. Press “+” or “” to set the temperature.
  5. Setting the Child Lock
    Long press “+” and “” to enter into child lock mode, BEOK- TDR89- Glass- Screen- Thermostat -fig -7will display. Long press “+” and “” again, the child lock will be disappeared.
  6. Setting the Programmable Mode. 
    • Press and holdBEOK- TDR89- Glass- Screen- Thermostat -fig -8 into programmable mode. 12345 and time will display. 12345 display in the position of week means 5+2;
    • Press “+” or “” to change the time.
    • PressBEOK- TDR89- Glass- Screen- Thermostat -fig -8 to do the temperature adjustment.
    • Press “+” or “” to change the temperature;
    • PressBEOK- TDR89- Glass- Screen- Thermostat -fig -8 to do the next period adjustment.
    • PressBEOK- TDR89- Glass- Screen- Thermostat -fig -9 to exit and save

BEOK- TDR89- Glass- Screen- Thermostat -fig -10

Remark: The defaulted temperature of period3 and period4 is the same as period2. Please change it according to the request.

Advanced Setting

Display Code Function Setting And Options Factory Default
1ADJ Temp. compensation -9.9-9.9℃ -2℃
2SEN Sensor selection IN: Internal sensor OUT: Floor sensor
ALL: Both internal sensor and floor sensor
 

IN

3LIT Modify the temp. limit 5-60℃ 35℃
4DIF Temp. difference start 0.5-10℃ 1℃
5LTP Antifreeze function OFF: Close anti-frozen
ON: Open anti-frozen
OFF
6PrG Weekly programming mode 0: 7 days programmable
1: 6+1 programmable
2: 5+2 programmable
 

2

7rLE Primary and secondary reverse selection 00: close the main and auxiliary  reversal
02: auxiliary reversal
00
8dLy Passive linkage output delay time 0-5min 0
9HlT Set upper temp. limit 35-95℃ 60
RFAC Restore factory defaults long press up button to adjust the display “—”, press power button to restore the factory settings

Sensor error:
Please select the right sensor mode. If select a different mode or there is error of sensor, Err will display on the LCD screen, the thermostat will stop heating till the problem is solved.

Installation Instruction

This product is suitable for standard 80*80mm wall box and 60 mm european round box.

BEOK- TDR89- Glass- Screen- Thermostat -fig -11

  1. Connect the power box according to the wiring diagram.
  2. Separate the power supply from the control board cable.
  3. Screw the power supply into the box of 86.
  4. Connect the power board to the board line, and align the buckle at 30 degrees to complete the installation.

ATT

Thank you for buying this product! Please read this manual for complete instructions on installing and operating your thermostat. If you require further assistance, please feel free to contact us.

In the box you will find

Model TDR89-EP TDR89-WP TDR89-WPB
Thermostat
User Manual
Screws  
External sensor

Our Service:
During the warranty, if it is belong to the quality issue, we will fix or replace them for you by free after test them. If it is not quality problem or beyond the warranty time, we will charge for the after-sales service.

BEOK- TDR89- Glass- Screen- Thermostat -fig -12

Warning: The symbol means the unit is being installed, it may cause electrical shock hazard during maintaining, so please make sure it is operated by the professional technical worker.

REFERENCE

DOWNLOAD MANUAL

BEOK TDR89 Glass Screen Thermostat Instruction Manual

logo - Copy - Copy

BEOK TDR89 Glass Screen Thermostat


Posted

in

by

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

To respond on your own website, enter the URL of your response which should contain a link to this post’s permalink URL. Your response will then appear (possibly after moderation) on this page. Want to update or remove your response? Update or delete your post and re-enter your post’s URL again. (Find out more about Webmentions.)