AmiciSmart STC-3028 Temperature Controller Digital Thermostat User Manual

AmiciSmart-LOGO

AmiciSmart STC-3028 Temperature Controller Digital Thermostat

AmiciSmart-STC-3028-Temperature-Controller-Digital-Thermostat-product

Specification And Size

Brand AmiciSmart
Item Dimensions LxWxH 7.5 x 3.5 x 8.5 Centimeters
Controller Type Fuzzy Logic Controller
Special Feature Temperature Display
Color Green
Specific Uses For Product Humidifier
null Heating
Connectivity Technology Wired
Included Components Thermostat- STC 3028
Power Source 220v

AmiciSmart-STC-3028-Temperature-Controller-Digital-Thermostat-fig.3

  • Front panel size: 75(L)×34.5(w)(mm)
  • Mounting size: 71(L)*29(W)(mm)
  • Product size: 75(L)×34.5(W)×85(D)(mm)
  • sensor length: Im (include the probe)

Description

  • Power supply: AC 110-220V,50/60Hz
  • Measurement temperature range: -20 ° C ~ +80 ° C
  • Measuring humidity range: 00%RH〜+100%RH
  • Accuracy: ±1°C 0.1%RH
  • Relay output contact capacity: 10A
  • Integrated sensor, line length 1 meter
  • Shell material: gray ABS flame-retardant plastic shell
  • Net weight 120g Gross weight 140g

Dimension

AmiciSmart-STC-3028-Temperature-Controller-Digital-Thermostat-fig.2

Wiring Diagram

AmiciSmart-STC-3028-Temperature-Controller-Digital-Thermostat-fig.1

  1. Long press  AmiciSmart-STC-3028-Temperature-Controller-Digital-Thermostat-fig.6 3 seconds, and the starting temperature value flashes (default 20 C) Press the plus or minus button to adjust, Long press 3 seconds, stop the temperature value flash (default 30 C) press the plus or minus button to adjust.
  2. Long press AmiciSmart-STC-3028-Temperature-Controller-Digital-Thermostat-fig.63 seconds, and the starting humidity value flashes (default 40%) Press the plus or minus button to adjust, long press 3 seconds, stop the humidity value flash (default 60%) press the plus or minus button to adjust.
  3. Press 3 seconds to reset the factory settings.

AmiciSmart-STC-3028-Temperature-Controller-Digital-Thermostat-fig.5

By simultaneously pressing buttons you are accessing the temperature calibration setting (default 0.0 C). You can make the desired temperature correction by adjusting the flashing value by 0.1, using the (up) and (DOWN) arrows.
By simultaneously pressing buttons you are accessing the relative humidity calibration setting (default 0.0% RH). You can make the desired humidity correction by adjusting the flashing value by 0.1, using the (up) and (DOWN) arrows.

Reference

DOWNLOAD MANUALS:

AmiciSmart STC-3028 Temperature Controller Digital Thermostat User Manual

AmiciSmart-LOGO

AmiciSmart STC-3028 Temperature Controller Digital Thermostat User Manual

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

To respond on your own website, enter the URL of your response which should contain a link to this post’s permalink URL. Your response will then appear (possibly after moderation) on this page. Want to update or remove your response? Update or delete your post and re-enter your post’s URL again. (Find out more about Webmentions.)