Fantini-cosmi-CH180RFWIFI-TOUCH-SCREEN-PROGRAMMABLE-THERMOSTAT-FEA

Fantini cosmi CH180RFWIFI TOUCH-SCREEN PROGRAMMABLE THERMOSTAT QUICK GUIDE

Fantini-cosmi-LOGO

Fantini Cosmi CH180RFWIFI TOUCH-SCREEN PROGRAMMABLE THERMOSTAT

Fantini-cosmi-CH180RFWIFI-TOUCH-SCREEN-PROGRAMMABLE-THERMOSTAT-PRO

PRELIMINARY INFORMATION
The complete English manual is available at the following link: pdf.fantinicosmi.it

CONTENTS OF PACKAGE

  • 1 programmable thermostat
  • 2 6/32UNC American standard thread screws to secure onto 503 flush mounting box (approximately Ø 3.5mm)
  • 1 quick guide

INTRODUCTION TO THE SYSTEM

The CH180RFWIFI is a programmable thermostat with a WiFi connection to control the wireless multi-zone temperature control system either directly or via the Intelliclima+ APP on a smartphone or tablet. With the multi-zone system, different temperature and humidity levels can be controlled within the same home. The values of each zone are set on the CH180RFWIFI master unit and changed locally by one or more devices installed inside the rooms. Communication between all devices takes place through radio waves.

Fantini-cosmi-CH180RFWIFI-TOUCH-SCREEN-PROGRAMMABLE-THERMOSTAT- (1)

INSTALLATION

ATTENTION!
Installation must be done by qualifi ed personnel in compliance with the requirements concerning installation of electrical equipment. Installation operations must be done with the system’s power disconnected.

The CH180RFWIFI programmable thermostat must be installed on the wall or on a fl ush mounting box, in 3 units or round, at a height of about 1.5m from the fl oor, in a position to properly detect room temperature.

Fantini-cosmi-CH180RFWIFI-TOUCH-SCREEN-PROGRAMMABLE-THERMOSTAT- (2) Fantini-cosmi-CH180RFWIFI-TOUCH-SCREEN-PROGRAMMABLE-THERMOSTAT- (3) Fantini-cosmi-CH180RFWIFI-TOUCH-SCREEN-PROGRAMMABLE-THERMOSTAT- (4)

ELECTRICAL CONNECTION

Fantini-cosmi-CH180RFWIFI-TOUCH-SCREEN-PROGRAMMABLE-THERMOSTAT- (5)

DESCRIPTION OF DISPLAY KEYS

Fantini-cosmi-CH180RFWIFI-TOUCH-SCREEN-PROGRAMMABLE-THERMOSTAT- (6)Fantini-cosmi-CH180RFWIFI-TOUCH-SCREEN-PROGRAMMABLE-THERMOSTAT- (7)

Pressing any key for the first time lights up the display.

  1. Day of the week
  2. Activation status: heating, cooling or dehumidification
  3. Bar graph to display messages and daily programming
  4. Room temperature (Celsius/ Fahrenheit) measured
  5. Measured humidity
  6. Multi-function touch icons
  7. Zone
  8. Operating mode
  9. Icon for various faults

Please note: the function of the multi-function keys varies depending on the situation and is described by the symbol that appears on the display next to the key.

LANGUAGE SELECTION

Fantini-cosmi-CH180RFWIFI-TOUCH-SCREEN-PROGRAMMABLE-THERMOSTAT- (8) Fantini-cosmi-CH180RFWIFI-TOUCH-SCREEN-PROGRAMMABLE-THERMOSTAT- (9)

DATE AND TIME SETTING

Fantini-cosmi-CH180RFWIFI-TOUCH-SCREEN-PROGRAMMABLE-THERMOSTAT- (10) Fantini-cosmi-CH180RFWIFI-TOUCH-SCREEN-PROGRAMMABLE-THERMOSTAT- (11) Fantini-cosmi-CH180RFWIFI-TOUCH-SCREEN-PROGRAMMABLE-THERMOSTAT- (12)

TECHNICAL FEATURES

Temperature adjustment scale 2 ÷ 40 °C, increase 0,1°C
Measurement scale/ room T display – 50 ÷ + 50 °C
Relative humidity adjustment scale 30 ÷ 70%, increase by 0.1°C
Measurement scale/room relative humidity display 0 ÷ 100%, increase by 1°C
Power supply 230V 50 Hz
Output type 1 relay with dry changeover contact (COM/NA/NC) 3 screw clamps (closed + open)
Contact range 5(3)A 250 Vca
Type of action 1 B.U. (connection micro-switch)
Software class A
Minimum adjustment differential 0,3 ÷ 5 K
Thermal gradient of reference 4 K/h
Maximum room temperature 45°C
Storage temperature -10°C ÷ +60°C
WiFi connection 2,4 GHz
Transmission and reception frequency 868 MHz
Maximum radio frequency power transmitted < 10 mW
Electric insulation Double insulation
Degree of protection IP40
Pollution degree 2
Pulse voltage 4000V
Assembly on wall or on flush mounting box
Dimensions 127 x 82 x 24 mm
Compliant with EN 60730-1 standards and second parts; Directive 2014/53/ EU (RED)
ErP classification ErP Class IV; 2% [Reg. EU 811/2013 – 813/2013] class VIII; 5% if used with 060RF actuators to create three or more heated zones

DISPOSAL OF PRODUCTS

The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste. Integrated batteries and accumulators can be disposed of with the product. They will be separated at the recycling centres. The black bar indicates that the product was placedon the market after August 13, 2005. By participating in separate collection of products and batteries, you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health. For more detailed information about the collection and recycling programmes available in your country, please contact your local city office or the shop where you purchased the product.

FANTINI COSMI S.p.A.
Via dell’Osio, 6 20090 Caleppio di Settala, Milano – ITALY
Tel. +39 02 956821 | Fax +39 02 95307006 | [email protected]
www.fantinicosmi.it

Reference

Download Manual:

Fantini cosmi CH180RFWIFI TOUCH-SCREEN PROGRAMMABLE THERMOSTAT QUICK GUIDE

Other Manual:

Fantini Cosmi CH180RFWIFI TOUCH-SCREEN PROGRAMMABLE THERMOSTAT Product Specification Guide

Fantini Cosmi CH180RFWIFI TOUCH-SCREEN PROGRAMMABLE THERMOSTAT INSTRUCTIONS Manuals

Fantini-cosmi-LOGO

Fantini Cosmi CH180RFWIFI TOUCH-SCREEN PROGRAMMABLE THERMOSTAT QUICK GUIDE

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

To respond on your own website, enter the URL of your response which should contain a link to this post’s permalink URL. Your response will then appear (possibly after moderation) on this page. Want to update or remove your response? Update or delete your post and re-enter your post’s URL again. (Find out more about Webmentions.)