Fantini cosmi CH120RF WIRELESS TOUCH-SCREEN THERMOSTAT
Preliminary information
The complete English manual is available at the following link: pdf.fantinicosmi.it
Introduction
CH120RF, equipped with a room temperature and relative humidity sensor, is a thermostat for indoor thermo-hygrometric control both in winter and in summer.
- a) It can work alone (single area) as a room thermostat or it can be integrated into an Intellicomfort+ wireless multi-area system.
- b) Using a wireless connection, it can control up to 15 devices between CH175 relay actuators and O60RF radiator actuators.
Installation
It is supplied with a base suitable for flush mounting on round boxes or for wall mounting. The installation must be done by qualified personnel in accordance with the prescriptions concerning the electric equipment installation. Before making any connections or operating the device, ensure that the power line is disconnected. Carry out the electrical connections according to the wiring diagram.
Wiring connection example
Description of keys/display and operating instructions
- Activation status: heating, air conditioning, or dehumidification;
- Summer/winter;
- Operating mode;
- Battery status;
- Radio signal strength and miscellaneous faults;
- Measured temperature;
- Measured humidity;
- 4 multi-funcion touch icons;
- Temporary modification timer
When not in use, the programmable thermostat switches off the backlight and the messages on the keys and goes into Stand-by mode (battery saving). To exit this mode, press and hold one of the 6 keys until the backlight turns on. The backlight duration and its intensity can be changed see the user manual.
Battery replacement
- Stage 1
- Stage 2
- Stage 3
CH120RF and the devices (if any) switch OFF
NOTE: to prevent losing settings it is recommended to replace the batteries during STAGE 1 or 2, by performing the operation within 60 seconds of removing the batteries. If the batteries are replaced during STAGE 3, after removing them, make sure the display turns off completely before inserting new batteries
Technical features
- Temperature regulation range: 2÷40 °C, by step 0,1°C
- Minimum regulation differential 0.3 – 5 K
- Range of temperature indication: -50 ÷ +50 °C
- Powered by: 2 alkaline AA 1.5V, battery life about 1 year
- Relay contact rating: 5(3)A 250V~ free voltage type
- Action type: Micro-disconnection 1BU
- Software: A class
- Reference thermal gradient: 4K/h
- Max ambient temperature operating: 45°C
- Electrical insulation: double
- Protection degree: IP40
- Pollution degree: 2
- Impulse voltage: 4000V
- Compliance: EN 60730-1 and second parts.
- Compliant with Directive 2014/53/EU (RED)
- ErP classification (EU Reg. 811/2013 – 813/2013): Class IV; 2%
Disposal of Products
The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste. Integrated batteries and accumulators can be disposed of with the product. They will be separated at the recycling centres. The black bar indicates that the product was placed on the market after August 13, 2005. By participating in separate collection of products and batteries, you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health. For more detailed information about the collection and recycling programmes available in your country, please contact your local city office or the shop where you purchased the product
FANTINI COSMI S.p.A.
Via dell’Osio, 6 20090 Caleppio di Settala, Milano – ITALY
- Tel. +39 02 956821
- Fax +39 02 95307006
- [email protected]
SUPPORTO TECNICO
[email protected]
EXPORT DEPARTMENT
Ph +39 02 95682229 | [email protected] www.fantinicosmi.com
Reference
Download Manual:
Fantini cosmi CH120RF WIRELESS TOUCH-SCREEN THERMOSTAT Quick guide
Other Manuals:
Fantini Cosmi CH120RF TOUCH-SCREEN ROOM THERMOSTAT Product Specification Guide
Fantini Cosmi CH120RF WIRELESS TOUCH-SCREEN THERMOSTAT Quick guide
Leave a Reply