Ritetemp-LOGO

Ritetemp 6020 Digital thermostat

Ritetemp- 6020 -Digital -thermostat -PRO

DESCRIPTION

Ritetemp- 6020 -Digital -thermostat - 1,

Statement of use

The 6020 can be used with millivolt, 24VAC, 1 and 2 stage conventional gas/oil/elec heat, 1 and 2 stage heat pumps, 2 or 3 wire zoned hot water, zoned forced air, 1 and 2 stage cooling and hybrid systems. It cannot be used with 120 volt heating systems.

Configure

Set HEAT/COOL mode switch to HEAT or COOL. The unit will display the Room temperature. Set the Fan switch to AUTO.

Operate

Low Battery

When the batteries are low, the battery icon will flash. The two AAA batteries in the unit need to be replaced. The HVAC system will stop functioning when the thermostat loses power; replace batteries as soon as you see this warning. Press RESET after replacing the batteriesRitetemp- 6020 -Digital -thermostat - 2

F0 / C0 Select

The F/C jumper is under the top cover Jumper #5. It determines which temperature system is displayed on the LCD display. With the jumper off, the display is Fahrenheit (default setting), with the jumper on both pins, the display is Centigrade. When the jumper is changed, the unit must be reset (under the top cover on the left).

To set a Heat Pump’s Aux-only mode

If you have a heat pump with auxiliary heat, and the heat pump is not working, you can use the auxiliary heat only by moving jumper 1 [heat pump] to jumper position 2 [ Aux only

Ritetemp- 6020 -Digital -thermostat - 3

Ritetemp

REFERENCE:

DOWNLOAD MANUAL:

Ritetemp 6020 Digital thermostat Operational Manual

other manuals:

Ritetemp 6020 Digital thermostat Installation Manual

Ritetemp-LOGO

Ritetemp 6020 Digital thermostat Operational Manual

Leave a Reply

Your email address will not be published. Required fields are marked *

Your post must include a link to this post.

How does this work?
Write a response on your own website and include a link to this post. Then submit your response’s URL here. Your response may appear here after moderation. To update or remove it, edit or delete your original post and submit the same URL again. Learn more about Webmentions.