STELPRO-STCP-MULTIPLE-PROGRAMMING-ELECTRONIC-THERMOSTAT-FEATURED

STELpro STCNP SINGLE PROGRAMMING ELECTRONIC THERMOSTAT Product Specifications Guide

Stelpro-logo

STELpro STCNP SINGLE PROGRAMMING ELECTRONIC THERMOSTAT 

STELPRO- STCP -MULTIPLE -PROGRAMMING- ELECTRONIC- THERMOSTAT -FEA

CONTROL YOU CAN DEPEND ON TO HEAT YOUR FLOORS

The STCNP is a floor heating system thermostat that can read floor or ambient air temperature. The thermostat can be locked to prevent it from exceeding the selected temperature.

  • SIMPLE TO USE AND INSTALL
  • INCREASED SAVINGS AND COMFORT
    INCOMPARABLE ACCURACY
  • CHOICE OF FLOOR OR AMBIENT
    TEMPERATURE CONTROL
  • BACKLIT SCREEN
    CAN BE USED AS A NIGHT LIGHT

COLOUR

  • white

FINISH

  • molded plastic

MANUFACTURING

  • built-in GFCI and pilot light (test)
  • four-wire connection/DPST with bipolar tripping
  • 13 ft. (4 m) floor sensor included*

WATTAGE AND VOLTAGE

  • maximum of 1920 W @ 120 V
  • maximum of 3330 W @ 208 V
  • maximum of 3840 W @ 240 V

DESIGNED FOR:

STELPRO-STE241-Low-Voltage-24V-Electronic-Thermostat-FIG.1

CONTROL

  • acts like a programmable thermostat by automatically lowering the temperature once per 24-hour period (Single programming mode)
  • advanced floor or ambient temperature control
  • protection against power failures (two hours)
  • lock option at a maximum temperature setpoint (Security mode)
  • display in Celsius or Fahrenheit

ACCURACY

  • accurate ambient temperature control of ± 0.5 °C (1 °F)
  • temperature sensing with thermistor

TEMPERATURE RANGE

  • Ambient mode: 3 to 35 °C (37 to 95 °F)
  • Floor mode: 3 to 28 °C (37 to 82 °F)

WARRANTY

  • three years
    * This thermostat is compatible with some floor sensors sold by other manufacturers.

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS
PRODUCT WATTS VOLTAGE AMPERAGE FREQUENCY GFCI PRICE
CODE MAXIMUM VOLTS AMPERES HZ MA
STCNPW5* 1920/3330/3840 120/208/240 16 50/60 5 185.00

5 mA thermostats have an integral Ground-Fault Circuit Interrupter (GFCI) (mandatory in bathrooms and similar room types). Please refer to the electrical and building codes in effect in your region to choose the best thermostat to suit your needs. Dimensions: 3 3/8 in. (86 mm) wide, 4 7/8 in. (124 mm) high, and 1 in. (25 mm) deep (total depth: 2 3/16 in. (56 mm)).

Stelpro reserves the right to modify descriptions, manufacturing specifications, or prices without prior notice. No returns are accepted on optional-color products.
For all the latest models and prices, please refer to our website at www.stelpro.com.

Reference

Download Manual

STELpro STCNP SINGLE PROGRAMMING ELECTRONIC THERMOSTAT Product Specifications Guide

OTHER MANUALS:

STELpro STCNP SINGLE PROGRAMMING ELECTRONIC THERMOSTAT User Guide

Stelpro-logo

STELpro STCNP SINGLE PROGRAMMING ELECTRONIC THERMOSTAT Product Specifications Guide

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

To respond on your own website, enter the URL of your response which should contain a link to this post’s permalink URL. Your response will then appear (possibly after moderation) on this page. Want to update or remove your response? Update or delete your post and re-enter your post’s URL again. (Find out more about Webmentions.)