Fantini cosmi CH110 Electronic Room Thermostat fea 

Fantini cosmi CH110 Electronic Room Thermostat Instruction Manual

Fantini logo

Fantini cosmi CH110 Electronic Room Thermostat

Fantini cosmi CH110 Electronic Room Thermostat   pro -

Installation

  • Is supplied with a base suitable for flush mounting on round boxes or for wall mounting.
  • Unscrew this screw and unhook the base from the device.

Fantini cosmi -CH110 -Electronic- Room -Thermostat- 2

Battery replacementFantini cosmi -CH110 -Electronic- Room -Thermostat- 3

Operation mode selectionFantini cosmi -CH110 -Electronic- Room -Thermostat- 4

Summer/Winter SelectionFantini cosmi -CH110 -Electronic- Room -Thermostat- 5

Dimension

Fantini cosmi -CH110 -Electronic- Room -Thermostat- 1

Operation mode selectionFantini cosmi -CH110 -Electronic- Room -Thermostat- 7

Temperature scaleFantini cosmi -CH110 -Electronic- Room -Thermostat- 8

Configuration menu

  • Insert the batteries while simultaneously pressing the buttonFantini cosmi -CH110 -Electronic- Room -Thermostat- 9
  • When the display shows P01 (first parameter), release the buttonFantini cosmi -CH110 -Electronic- Room -Thermostat- 9
  • The configuration parameters are represented on the display by an index: P01, P02 … Scroll through the indexes of the parameters by pressing the buttons and .

changing a parameterFantini cosmi -CH110 -Electronic- Room -Thermostat- 10

  • To exit the parameters configuration, press the buttons  Fantini cosmi -CH110 -Electronic- Room -Thermostat- 11until the displays shows “END”.
  • Press the buttonFantini cosmi -CH110 -Electronic- Room -Thermostat- 9. If no button is pressed for 1 minute, the thermostat exits the parameters configuration.

Technical characteristics

  • Contact rating 5(3)A 250V~
  • Micro-disconnection 1B
  • No-load switching contact
  • Powered by 2 alkaline AAA 1.5V
  • Battery life over 2 years
  • Automatic monitoring of battery charge with signal on display when battery is low
  • Max ambient temperature 45°C
  • Protection degree IP20
  • Pollution degree 2
  • Impulse voltage 4000V
  • Class A Software
  • Double insulation
  • In compliance with EN 60730-1 and second parts.
  • ErP classification: ErP Class IV; 2% (EU
  • Reg. 811/2013 – 813/201

DISPOSAL OF PRODUCTS

The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste. Integrated batteries and accumulators can be disposed of with the product. They will be separated at the recycling centres. The blackbar indicates that the product was placed on the market after August 13, 2005. By participating in separate collection of products and batteries, you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health. For more detailed information about the collection and recycling programmes available in your country, please contact your local city office or the shop where you purchased the product

FANTINI COSMI S.p.A.

  • Via dell’Osio, 6 20090 Caleppio di Settala, Milano – ITALY
  • Tel. +39 02 956821
  • Fax +39 02 95307006
  • [email protected]

SUPPORTO TECNICO:

EXPORT DEPARTMENT:

REFERENCE

DOWNLOAD MANUALS:

Fantini cosmi CH110 Electronic Room Thermostat Instruction Manual

OTHER MANUALS:

Fantini cosmi CH110 Electronic Room Thermostat Product Data Sheet
Fantini logo

Fantini cosmi CH110 Electronic Room Thermostat Instruction Manual

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

To respond on your own website, enter the URL of your response which should contain a link to this post’s permalink URL. Your response will then appear (possibly after moderation) on this page. Want to update or remove your response? Update or delete your post and re-enter your post’s URL again. (Find out more about Webmentions.)